Woodstock D2722 Base and Column, If installing the W1670 to a concrete floor, do these steps

Page 11

Base and Column

For maximum stability, secure the W1670 floor-model drill press to a sturdy surface like a floor or a 4' x 4' x 3⁄4" piece of plywood. For the W1669 bench-model, secure it to a sturdy workbench or tool table.

1.UNPLUG THE MACHINE!

•If installing the W1670 to a concrete floor, do these steps:

a.Position the drill press in a sensible work area where the base sits flat at all four corners, or the base may crack when you tighten the fasteners.

b.Mark and drill the floor, and install the concrete anchor bolts (not included) (see

Figure 6).

c.Position the base and fasten the base to the floor carefully as not to crack it.

•If installing the W1670 to a plywood base, do these steps:

a.Center the drill press base along the back edge of the 4' x 4' x 3⁄4" sheet of plywood

(see Figure 7).

b.At each corner of the drill press base, drill the plywood.

c.Secure the base to the plywood with four

3/8" diameter bolts, washers, and nuts (not included).

•If installing the W1669 to a tool table or workbench, do these steps:

a.Position the base on a bench or tool table capable of supporting approximately 100 lbs.

b.Drill two mounting holes (Figure 8), and secure the base to the table with the two supplied carriage bolts and wing nuts.

2.Place the column on the base, and install the four column bolts supplied.

TIPPING HAZARD!

Never mount a drill press to a mobile base. Mount the drill press base to a sturdy surface or the drill press may tip and cause injury.

Figure 6. Secure base to floor.

Figure 7. Secure base to 4' x 4' x 3⁄4" plywood.

Mounting

Holes

Figure 8. Workbench mounting holes.

ASSEMBLY

-9-

Page 10 Page 12
Image 11
Page 10 Page 12
Contents INSTRUCTION MANUAL Page Contents Woodstock Technical Support IntroductionShielded & Lubricated Ball Bearings SpecificationsStandard Safety Instructions SafetyKeep proper footing and balance at all times Additional Safety Instructions for Drill PressesNever drill while holding Workpiece by hand Avoiding Potential InjuriesGrounding 110V OperationExtension Cords Ard for children and animals Injury may occur Immediately discard all plasticSee Figure If installing the W1670 to a concrete floor, do these stepsBase and Column Table Support To install the table support assembly, do these stepsBevel and rack seated correctly Column Ring Set Screw Headstock To install the headstock assembly, do these stepsSeating chuck into spindle Open the belt safety cover see Figure To adjust the drive belt tension, do these stepsTypical spring cover lock slot Locking lug Feed Shaft Spring TensionQuill-Shaft Screw To adjust the quill-shaft screw, do these stepsW1669 Table support assembly To adjust the table, do these stepsTo start the drill press, do these steps Test RunTo use the headstock-tilting feature, do these steps To use the headstock-sliding feature, do these stepsChanging Drill Bits Installing a drill bitLoosening lock knob Speed ChangesStop Flange Depth Drill Press RPM ChartTo adjust the drilling depth, do these steps Drilling DepthDrill, Cutter, and Hole Saw Suggested RPM Chart Operations Lubrication GeneralTroubleshooting Electrocution Hazard W1669 and W1670 Drill Press 110V WiringW1669 and W1670 Parts W1669, W1670PARTSParts List W1669 Parts W1669PARTSParts List W1670 Parts W1670PARTSParts List Accessories Maintenance Page Page Warranty Comments Warranty RegistrationWoodstock international, inc. p.o. box Bellingham, wa

D2677, D2722, W1669, W1670 specifications

Woodstock W1670, W1669, D2722, and D2677 are exemplary woodworking machines that reflect the brand's commitment to quality and efficiency in wood processing. Each of these models brings distinct features, technologies, and characteristics designed to enhance productivity and user experience in woodworking applications.

The Woodstock W1670 is a powerful table saw that stands out for its robust construction and innovative features. It features a high-performance motor that ensures precision cuts in various wood types, making it suitable for both professional and amateur woodworkers. The saw is equipped with an adjustable blade height and angle, allowing users to achieve the desired cut with ease. Additionally, its large tabletop provides ample workspace, promoting stability and maneuverability during operations.

The Woodstock W1669 is a versatile bandsaw that excels in creating intricate cuts and curves. This model is designed with a reliable motor that delivers consistent power, facilitating effective cutting through dense materials. One of its notable characteristics is the spacious throat capacity, allowing users to work with larger workpieces. The precision-engineered blade guides reduce friction, promoting longer blade life and higher quality cuts. Furthermore, the easy-to-read tension indicator ensures optimal blade tension for enhanced performance.

Moving to the D2722, this drill press is engineered for precision drilling tasks. It features digital readouts for depth control, ensuring accuracy in repetitive tasks. The heavy-duty construction contributes to reduced vibrations, which is essential for achieving clean holes in various materials. This model also supports variable speed settings, allowing users to tailor the drilling speed for different applications and materials. The adjustable work table adds to the convenience, making it easier to accommodate various workpiece sizes.

Lastly, the D2677 is a rugged planer designed for smoothing and finishing surfaces. It boasts a powerful motor that enables smooth operation through hard and soft woods alike. The adjustable depth of cut feature allows for precise thickness adjustments, ensuring uniformity in finished pieces. Additionally, the infeed and outfeed tables are designed to support larger stock, improving workflow efficiency. The dust collection port is another beneficial feature, facilitating a cleaner workspace.

In conclusion, the Woodstock W1670, W1669, D2722, and D2677 models excel in their respective functions, showcasing advanced technologies and user-friendly designs, ultimately making them essential tools for any woodworking shop. Whether cutting, drilling, or finishing, these machines ensure high-quality results and enhanced productivity.
Top Page Image Contents