Woodstock D2677, W1670, W1669, D2722 instruction manual Standard Safety Instructions

Page 6

SAFETY

SAFETY

READ MANUAL BEFORE OPERATING MACHINE

FAILURE TO FOLLOW INSTRUCTIONS BELOW WILL

RESULT IN PERSONAL INJURY

Indicates an imminently hazardous situation which, if not avoided, WILL result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, COULD result in death or serious injury.

 

 

 

Indicates a potentially hazardous situation which, if not avoided, MAY

 

 

 

result in minor or moderate injury and damage to the machine. It may

 

 

 

also be used to alert against unsafe practices.

 

 

 

NOTICE

This symbol is used to alert the user to useful information about proper

operation of the equipment.

Standard Safety Instructions

1.Thoroughly read the instruction manual before operating your machine. Learn the applications, limitations and potential hazards of this machine. Keep manual in a safe, convenient place for future reference.

2.Keep work area clean and well lighted. Clutter and inadequate lighting invite potential hazards.

3.Ground all tools. If a machine is equipped with a three-prong plug, it must be plugged into a three-hole electrical outlet or grounded extension cord. If using an adapter to aid in accommodat- ing a two-hole receptacle, ground the adapter using a screw to a known ground.

4.Wear eye protection at all times. Use safety goggles with side shields or safety goggles, meeting the national safety standards, while operating this machine.

5.Avoid dangerous environments. DO NOT operate this machine in wet or open flame environ- ments. Airborne dust particles could cause an explosion and severe fire hazard.

6.Ensure all guards are securely in place and in working condition.

7.Make sure switch is in the “OFF” position before connecting power to machine.

8.Keep work area clean; free of clutter, grease, etc.

9.Keep children and visitors away. All visitors should be kept at a safe distance away while operat- ing unit.

10.Childproof your workshop with padlocks, master switches, or by removing starter keys.

11.Disconnect the machine when cleaning, adjusting, or servicing.

-4-

Page 5 Page 7
Image 6
Page 5 Page 7
Contents INSTRUCTION MANUAL Page Contents Introduction Woodstock Technical SupportSpecifications Shielded & Lubricated Ball BearingsSafety Standard Safety InstructionsAdditional Safety Instructions for Drill Presses Keep proper footing and balance at all timesAvoiding Potential Injuries Never drill while holding Workpiece by hand110V Operation Extension CordsGrounding Immediately discard all plastic Ard for children and animals Injury may occurIf installing the W1670 to a concrete floor, do these steps Base and ColumnSee Figure To install the table support assembly, do these steps Table SupportBevel and rack seated correctly Column Ring Set Screw To install the headstock assembly, do these steps HeadstockSeating chuck into spindle To adjust the drive belt tension, do these steps Open the belt safety cover see FigureFeed Shaft Spring Tension Typical spring cover lock slot Locking lugTo adjust the quill-shaft screw, do these steps Quill-Shaft ScrewTo adjust the table, do these steps W1669 Table support assemblyTest Run To start the drill press, do these stepsTo use the headstock-sliding feature, do these steps To use the headstock-tilting feature, do these stepsInstalling a drill bit Changing Drill BitsSpeed Changes Loosening lock knobDrilling Depth Drill Press RPM ChartTo adjust the drilling depth, do these steps Stop Flange DepthDrill, Cutter, and Hole Saw Suggested RPM Chart Operations General LubricationTroubleshooting W1669 and W1670 Drill Press 110V Wiring Electrocution HazardW1669 and W1670 Parts W1669, W1670PARTSParts List W1669 Parts W1669PARTSParts List W1670 Parts W1670PARTSParts List Accessories Maintenance Page Page Warranty Warranty Registration CommentsWoodstock international, inc. p.o. box Bellingham, wa

D2677, D2722, W1669, W1670 specifications

Woodstock W1670, W1669, D2722, and D2677 are exemplary woodworking machines that reflect the brand's commitment to quality and efficiency in wood processing. Each of these models brings distinct features, technologies, and characteristics designed to enhance productivity and user experience in woodworking applications.

The Woodstock W1670 is a powerful table saw that stands out for its robust construction and innovative features. It features a high-performance motor that ensures precision cuts in various wood types, making it suitable for both professional and amateur woodworkers. The saw is equipped with an adjustable blade height and angle, allowing users to achieve the desired cut with ease. Additionally, its large tabletop provides ample workspace, promoting stability and maneuverability during operations.

The Woodstock W1669 is a versatile bandsaw that excels in creating intricate cuts and curves. This model is designed with a reliable motor that delivers consistent power, facilitating effective cutting through dense materials. One of its notable characteristics is the spacious throat capacity, allowing users to work with larger workpieces. The precision-engineered blade guides reduce friction, promoting longer blade life and higher quality cuts. Furthermore, the easy-to-read tension indicator ensures optimal blade tension for enhanced performance.

Moving to the D2722, this drill press is engineered for precision drilling tasks. It features digital readouts for depth control, ensuring accuracy in repetitive tasks. The heavy-duty construction contributes to reduced vibrations, which is essential for achieving clean holes in various materials. This model also supports variable speed settings, allowing users to tailor the drilling speed for different applications and materials. The adjustable work table adds to the convenience, making it easier to accommodate various workpiece sizes.

Lastly, the D2677 is a rugged planer designed for smoothing and finishing surfaces. It boasts a powerful motor that enables smooth operation through hard and soft woods alike. The adjustable depth of cut feature allows for precise thickness adjustments, ensuring uniformity in finished pieces. Additionally, the infeed and outfeed tables are designed to support larger stock, improving workflow efficiency. The dust collection port is another beneficial feature, facilitating a cleaner workspace.

In conclusion, the Woodstock W1670, W1669, D2722, and D2677 models excel in their respective functions, showcasing advanced technologies and user-friendly designs, ultimately making them essential tools for any woodworking shop. Whether cutting, drilling, or finishing, these machines ensure high-quality results and enhanced productivity.
Top Page Image Contents