Woodstock W1669, W1670, D2677, D2722 Bevel and rack seated correctly Column Ring Set Screw

Page 13

8.Seat the rack tapered-point into the bevel that is cut into the column support tube

(see Figure 12).

9.Slide the column ring onto the column with the inside bevel in the down position until the rack tapered-point seats into the bevel

(see Figure 13).

10.Position the column ring so the table bracket and rack can just rotate around the column without binding.

11.Carefully, snug the set screw to hold the column ring in place. Over-tightening the column ring will distort or split the column ring.

Tapered Rack

Point and

Column Support

Tube Bevel.

Figure 12. Bevel and rack seated correctly.

Column Ring

Bevel

Set

Screw

ASSEMBLY

Figure 13. Column ring in the correct position.

-11-

Image 13

Contents INSTRUCTION MANUAL Page Contents Woodstock Technical Support IntroductionShielded & Lubricated Ball Bearings SpecificationsStandard Safety Instructions SafetyKeep proper footing and balance at all times Additional Safety Instructions for Drill PressesNever drill while holding Workpiece by hand Avoiding Potential InjuriesExtension Cords 110V OperationGrounding Ard for children and animals Injury may occur Immediately discard all plasticBase and Column If installing the W1670 to a concrete floor, do these stepsSee Figure Table Support To install the table support assembly, do these stepsBevel and rack seated correctly Column Ring Set Screw Headstock To install the headstock assembly, do these stepsSeating chuck into spindle Open the belt safety cover see Figure To adjust the drive belt tension, do these stepsTypical spring cover lock slot Locking lug Feed Shaft Spring TensionQuill-Shaft Screw To adjust the quill-shaft screw, do these stepsW1669 Table support assembly To adjust the table, do these stepsTo start the drill press, do these steps Test RunTo use the headstock-tilting feature, do these steps To use the headstock-sliding feature, do these stepsChanging Drill Bits Installing a drill bitLoosening lock knob Speed ChangesTo adjust the drilling depth, do these steps Drill Press RPM ChartDrilling Depth Stop Flange DepthDrill, Cutter, and Hole Saw Suggested RPM Chart Operations Lubrication GeneralTroubleshooting Electrocution Hazard W1669 and W1670 Drill Press 110V WiringW1669 and W1670 Parts W1669, W1670PARTSParts List W1669 Parts W1669PARTSParts List W1670 Parts W1670PARTSParts List Accessories Maintenance Page Page Warranty Comments Warranty RegistrationWoodstock international, inc. p.o. box Bellingham, wa

D2677, D2722, W1669, W1670 specifications

Woodstock W1670, W1669, D2722, and D2677 are exemplary woodworking machines that reflect the brand's commitment to quality and efficiency in wood processing. Each of these models brings distinct features, technologies, and characteristics designed to enhance productivity and user experience in woodworking applications.

The Woodstock W1670 is a powerful table saw that stands out for its robust construction and innovative features. It features a high-performance motor that ensures precision cuts in various wood types, making it suitable for both professional and amateur woodworkers. The saw is equipped with an adjustable blade height and angle, allowing users to achieve the desired cut with ease. Additionally, its large tabletop provides ample workspace, promoting stability and maneuverability during operations.

The Woodstock W1669 is a versatile bandsaw that excels in creating intricate cuts and curves. This model is designed with a reliable motor that delivers consistent power, facilitating effective cutting through dense materials. One of its notable characteristics is the spacious throat capacity, allowing users to work with larger workpieces. The precision-engineered blade guides reduce friction, promoting longer blade life and higher quality cuts. Furthermore, the easy-to-read tension indicator ensures optimal blade tension for enhanced performance.

Moving to the D2722, this drill press is engineered for precision drilling tasks. It features digital readouts for depth control, ensuring accuracy in repetitive tasks. The heavy-duty construction contributes to reduced vibrations, which is essential for achieving clean holes in various materials. This model also supports variable speed settings, allowing users to tailor the drilling speed for different applications and materials. The adjustable work table adds to the convenience, making it easier to accommodate various workpiece sizes.

Lastly, the D2677 is a rugged planer designed for smoothing and finishing surfaces. It boasts a powerful motor that enables smooth operation through hard and soft woods alike. The adjustable depth of cut feature allows for precise thickness adjustments, ensuring uniformity in finished pieces. Additionally, the infeed and outfeed tables are designed to support larger stock, improving workflow efficiency. The dust collection port is another beneficial feature, facilitating a cleaner workspace.

In conclusion, the Woodstock W1670, W1669, D2722, and D2677 models excel in their respective functions, showcasing advanced technologies and user-friendly designs, ultimately making them essential tools for any woodworking shop. Whether cutting, drilling, or finishing, these machines ensure high-quality results and enhanced productivity.