Woodstock W1670, W1669, D2677 Table Support, To install the table support assembly, do these steps

Page 12

ASSEMBLY

Table Support

The W1669 comes with a one geared table bracket. The W1670 comes with a geared table bracket and table support arm, which allows the distance between the column and table to be adjusted. No table support parts are inter- changeable between the two drill presses.

To install the table support assembly, do these steps:

1.Insert the table lock lever through the un- threaded hole (see Figure 9) in the table bracket, and then tighten the lever into the threaded side exactly three turns.

2.Starting with the pinion gear, insert the shaft into the table bracket and mesh the teeth with the worm gear as shown in

Figure 9.

3.Align the set screw in the crank handle with the flat pad on pinion shaft.

4.Tighten the 3mm set screw to lock the handle in place (see Figure 10).

5.Examine the rack and note that the rack teeth at one end are cut closer to the end of the rack than the other.

6.Insert the rack through the table bracket so the end that has the rack teeth cut clos- er to the end is pointing down (see Figure 11).

7.Hold the rack against the worm gear and slide the table bracket and rack onto the column (see Figure 11).

Pinion

Gear

Worm

Gear

Un-threaded Hole

Figure 9. Pinion and worm gear installation.

Flat

Pad

Set Screw

Figure 10. Align set screw with flat pad on

pinion.

-10-

Figure 11. Installing rack and table bracket.

Page 11 Page 13
Image 12
Page 11 Page 13
Contents INSTRUCTION MANUAL Page Contents Introduction Woodstock Technical SupportSpecifications Shielded & Lubricated Ball BearingsSafety Standard Safety InstructionsAdditional Safety Instructions for Drill Presses Keep proper footing and balance at all timesAvoiding Potential Injuries Never drill while holding Workpiece by hand110V Operation Extension CordsGrounding Immediately discard all plastic Ard for children and animals Injury may occurIf installing the W1670 to a concrete floor, do these steps Base and ColumnSee Figure To install the table support assembly, do these steps Table SupportBevel and rack seated correctly Column Ring Set Screw To install the headstock assembly, do these steps HeadstockSeating chuck into spindle To adjust the drive belt tension, do these steps Open the belt safety cover see FigureFeed Shaft Spring Tension Typical spring cover lock slot Locking lugTo adjust the quill-shaft screw, do these steps Quill-Shaft ScrewTo adjust the table, do these steps W1669 Table support assemblyTest Run To start the drill press, do these stepsTo use the headstock-sliding feature, do these steps To use the headstock-tilting feature, do these stepsInstalling a drill bit Changing Drill BitsSpeed Changes Loosening lock knobDrill Press RPM Chart To adjust the drilling depth, do these stepsDrilling Depth Stop Flange DepthDrill, Cutter, and Hole Saw Suggested RPM Chart Operations General LubricationTroubleshooting W1669 and W1670 Drill Press 110V Wiring Electrocution HazardW1669 and W1670 Parts W1669, W1670PARTSParts List W1669 Parts W1669PARTSParts List W1670 Parts W1670PARTSParts List Accessories Maintenance Page Page Warranty Warranty Registration CommentsWoodstock international, inc. p.o. box Bellingham, wa

D2677, D2722, W1669, W1670 specifications

Woodstock W1670, W1669, D2722, and D2677 are exemplary woodworking machines that reflect the brand's commitment to quality and efficiency in wood processing. Each of these models brings distinct features, technologies, and characteristics designed to enhance productivity and user experience in woodworking applications.

The Woodstock W1670 is a powerful table saw that stands out for its robust construction and innovative features. It features a high-performance motor that ensures precision cuts in various wood types, making it suitable for both professional and amateur woodworkers. The saw is equipped with an adjustable blade height and angle, allowing users to achieve the desired cut with ease. Additionally, its large tabletop provides ample workspace, promoting stability and maneuverability during operations.

The Woodstock W1669 is a versatile bandsaw that excels in creating intricate cuts and curves. This model is designed with a reliable motor that delivers consistent power, facilitating effective cutting through dense materials. One of its notable characteristics is the spacious throat capacity, allowing users to work with larger workpieces. The precision-engineered blade guides reduce friction, promoting longer blade life and higher quality cuts. Furthermore, the easy-to-read tension indicator ensures optimal blade tension for enhanced performance.

Moving to the D2722, this drill press is engineered for precision drilling tasks. It features digital readouts for depth control, ensuring accuracy in repetitive tasks. The heavy-duty construction contributes to reduced vibrations, which is essential for achieving clean holes in various materials. This model also supports variable speed settings, allowing users to tailor the drilling speed for different applications and materials. The adjustable work table adds to the convenience, making it easier to accommodate various workpiece sizes.

Lastly, the D2677 is a rugged planer designed for smoothing and finishing surfaces. It boasts a powerful motor that enables smooth operation through hard and soft woods alike. The adjustable depth of cut feature allows for precise thickness adjustments, ensuring uniformity in finished pieces. Additionally, the infeed and outfeed tables are designed to support larger stock, improving workflow efficiency. The dust collection port is another beneficial feature, facilitating a cleaner workspace.

In conclusion, the Woodstock W1670, W1669, D2722, and D2677 models excel in their respective functions, showcasing advanced technologies and user-friendly designs, ultimately making them essential tools for any woodworking shop. Whether cutting, drilling, or finishing, these machines ensure high-quality results and enhanced productivity.
Top Page Image Contents