Model W1802 2 QT. Professional Spray Gun
OPERATIONS
EXPLOSION HAZARD! DO NOT smoke or have any source of flame or spark near spraying. Vapors will explode if ignited.
RESPIRATORY HAZARD! Always use respirator rated for organic vapor and solvent use when using spray equip- ment. Failure to protect your lungs can lead to respiratory illness and nervous system damage.
TOXIC FUMES! Always use an approved spray booth or well ventilated area when spraying. NEVER spray in a con- fined space where toxic fumes and flammable vapors can accumulate to deadly levels.
Spraying
The Model W1802 spray system is designed to spray medium to high viscosity liquids. It is ideal for painting large areas such as trucks, busses, and vans.
To use your spray system:
1.Read and follow the material manufacturer's instructions for spraying, mixing, safety, disposal, and any other instruction on the label or Material Safety Data Sheet (MSDS).
2.After mixing, filter the material through a strainer while filling the pressure cup. (Strainers are available from your paint supplier.)
3.Fill the pressure cup 3⁄4 full or less. DO NOT OVERFILL. Overfilling will cause pressurization problems and contribute to leaks and spills.
4.Tighten the cap securely on the pressure cup and ensure all other fittings are secure to avoid air leaks or material spills.
5.Set the inlet air pressure (the air coming to the pressure cup) between 29 and 43.5 PSI or to the material manufacturer's recommendations. DO NOT exceed 50 PSI for any reason.
Note: Periodically pull the ring on the safety valve to ensure it moves freely. Do not use the pressure cup if the safety valve is not working!