Woodstock W1802 owner manual Lubrication points

Page 15

Model W1802 2 QT. Professional Spray Gun

Lubrication

A

B

C

Figure 18. Lubrication points.

Lubricate the following areas in Figures 18-20with a non-silicon spray gun lubricant after each cleaning.

A.Atomizing Cap Threads

B.Air Valve Packing

C.Trigger Pin

D.Fluid Control Knob

E.Pattern Control Knob

F.Pressure Control Knob

Allow the lubricant to coat threads, and run into gun body to lubricate all moving parts and seals.

-13-

E

D

Figure 19. Control knob lubrication.

F

Figure 20. Pressure control threads.

Image 15
Contents QT. Professional Spray GUN SET Page Safety Safety Instructions for Pneumatic ToolsBefore Operating This Equipment Always USE Safety Glasses Disconnect Compressed AIR Additional Safety Instructions for Spray GunsW1802 Specifications IntroductionWoodstock Technical Support Setup UnpackingInventory Installing fluid hose AssemblyControls Spraying OperationsOverlap technique Set up for vertical spray stroke With horizontal fan pattern AdjustmentsCleaning Cleaning & LubricationDisassembly for cleaning Lubrication points LubricationTroubleshooting Symptom Possible Cause Possible Solution W1802 Parts Breakdown Description W1802 Parts ListPage Page Warranty and Returns Warranty Registration Woodstock International INC