Woodstock W1821 owner manual Always Lock Mobile Bases if Used Before Operating Machinery

Page 6

SAFETY

Model W1821 (For Machines Mfg. Since 3/10)

10.NEVER LEAVE WHEN MACHINE IS RUNNING. Turn power OFF and allow all moving parts to come to a complete stop before leaving machine unattended.

11.DO NOT USE IN DANGEROUS ENVIRONMENTS. DO NOT use machinery in damp, wet locations, or where any flammable or noxious fumes may exist.

12.KEEP WORK AREA CLEAN AND WELL LIT. Clutter and dark shadows may cause accidents.

13.USE A GROUNDED EXTENSION CORD RATED FOR THE MACHINE AMPERAGE. Undersized cords over- heat and lose power. Replace extension cords if they become damaged. DO NOT use extension cords for 220V machinery.

14.ALWAYS DISCONNECT FROM POWER SOURCE BEFORE SERVICING MACHINERY. Make sure switch is in OFF position before reconnecting.

15.MAINTAIN MACHINERY WITH CARE. Keep blades sharp and clean for best and safest performance. Follow instructions for lubricating and changing accessories.

16.MAKE SURE GUARDS ARE IN PLACE AND WORK CORRECTLY BEFORE USING MACHINERY.

17.REMOVE ADJUSTING KEYS AND WRENCHES. Make a habit of checking for keys and adjusting wrenches before turning machinery ON.

18.CHECK FOR DAMAGED PARTS BEFORE USING MACHINERY. Check for binding and alignment of parts, broken parts, part mounting, loose bolts, and any other conditions that may affect machine operation. Repair or replace damaged parts.

19.USE RECOMMENDED ACCESSORIES. Refer to the instruction manual for recommended accessories. The use of improper accessories may cause risk of injury.

20.DO NOT FORCE MACHINERY. Work at the speed for which the machine or accessory was designed.

21.SECURE WORKPIECE. Use clamps or a vise to hold the workpiece when practical. A secured workpiece protects your hands and frees both hands to operate the machine.

22.DO NOT OVERREACH. Keep proper footing and balance at all times.

23.MANY MACHINES WILL EJECT THE WORKPIECE TOWARD THE OPERATOR. Know and avoid condi- tions that cause the workpiece to "kickback."

24.ALWAYS LOCK MOBILE BASES (IF USED) BEFORE OPERATING MACHINERY.

25.BE AWARE THAT CERTAIN DUST MAY BE HAZARDOUS to the respiratory systems of people and animals, especially fine dust. Make sure you know the hazards associated with the type of dust you will be exposed to and always wear a respirator approved for that type of dust.

-4-

Image 6
Contents OWNERS MANUAL Page Contents Specifications IntroductionWoodstock Technical Support Safety Safety Standard Machinery Safety Always Lock Mobile Bases if Used Before Operating Machinery Additional Safety for Router Tables Inventory SetupUnpacking Description QtyAssembly Needed for Assembly QtyIllustrated example of a fence Fence knurled handles Installed Dust port installed Guard Bracket Router Installation To install a router, do these stepsOperations GeneralOperation Overview Workpiece InspectionEdge Jointing To joint the edge of a workpiece, do these stepsGroove cutting setup-side view Guard removed for clarity Groove CuttingRouting Small Stock To make a zero-clearance fence, do these stepsExample of using a jig with a Starting block Free-Hand RoutingShop Fox Model W1500 Right Angle Jig Template W1727-Shop Fox 1 HP Dust Collector AccessoriesRouter Table Attachment Accessories D2274-Shop Fox 5 Roller StandMaintenance Cleaning & ProtectingParts PartsFence Model W1821 For Machines Mfg. Since 3/10 Woodstock international inc. p.o. box Bellingham, Wa Warranty High Quality Machines and Tools