RIDGID R8411511 manual Installing Bits, Removing Bits

Page 14

OPERATION

INSTALLING BITS

UNLOCK

See Figure 9 - 10

(RELEASE)

 

nLock the switch trigger by placing the direction of rotation selector in center position.

n Open or close chuck jaws to a point where the opening is slightly larger than the bit size you intend to use. Also, raise the front of the drill slightly to keep the bit from fall- ing out of the chuck jaws.

n Insert drill bit straight into chuck the full length of the jaws as shown in figure 9. The drill bit must be inserted past the first set of carbide inserts, to a depth of 7/8 in.

n Tighten the chuck jaws on the drill bit.

n To tighten the chuck jaws on drill bit; grasp and hold the

LOCK

(TIGHTEN)

collar of the chuck with one hand, while rotating the chuck

 

body with your other hand.

 

NOTE: Rotate the chuck body in the direction of the arrow

 

marked LOCK to tighten chuck jaws.

 

n Do not use a wrench to tighten or loosen the chuck

 

jaws.

 

WARNING:

Make sure to insert the drill bit straight into the chuck jaws. Do not insert the drill bit into the chuck jaws at an angle then tighten, as shown in figure 0. This could cause the drill bit to be thrown from the drill, resulting in possible serious personal injury or damage to the chuck.

REMOVING BITS

See Figure 9.

n Lock the switch trigger by placing the direction of rotation selector in center position. See Figure 4.

Loosen the chuck jaws from the drill bit.

n To loosen: grasp and hold the collar of the chuck with one hand, while rotating chuck body with your other hand. NOTE: Rotate chuck body in the direction of the arrow marked UNLOCK to loosen chuck jaws.

n Do not use a wrench to tighten or loosen the chuck jaws.

n Remove the drill bit from the chuck jaws.

Fig. 9

Fig. 10

14

Image 14
Contents OPERATOR’S Manual Table of Contents IntroductionPersonal Safety General Safety RulesElectrical Safety Work AreaSpecific Safety Rules ServiceSafety Rules for Charger Symbols Symbol Name DESIGNATION/EXPLANATIONSymbol Signal Meaning Features Product SpecificationsAssembly Operation Power Indicator Evaluate Indicator Charging Full LED Function of ChargerVariable Speed Switch Trigger Installing Battery PackRemoving Battery Pack Variable SpeedTWO Speed Gear Train HI-LO ReversibleTWO-SPEED Gear Train Auxiliary Handle To TightenInstalling Bits Removing BitsAdjusting Torque Installing Depth Gage RODAdjustable Torque Clutch To Increase TorqueDrilling Metal Drilling To Adjust Drilling or Hammer ModeWood Drilling Masonry DrillingChuck Removal MaintenanceGeneral Maintenance Mallet Chuck Jaws Keyless HEX KEY Wrench ScrewdriverKeeping the Charger Vents Clean Battery Pack Removal Preparation for RecyclingWhat is Covered Under the 3 Year Limited Service Warranty WarrantyDAY Satisfaction Guarantee Policy HOW to Obtain Service What is not CoveredPage Customer Service Information

R8411511 specifications

The RIDGID R8411511 is a powerful and versatile cordless drill driver that stands out in the competitive tool market. Known for its rugged design and exceptional performance, this tool is catered to both professionals and DIY enthusiasts alike. Equipped with a robust 18V lithium-ion battery, the R8411511 ensures maximum run time and efficiency, allowing users to tackle a variety of tasks without the worry of frequent recharging.

One of the standout features of the RIDGID R8411511 is its impressive torque output. The drill delivers an astounding maximum torque of 600 in-lbs, making it capable of handling tough materials such as metal, wood, and even masonry. This high torque setting can effectively tackle heavy-duty applications, making it an invaluable asset for construction sites or home renovations.

The tool features a 2-speed transmission, offering both high-speed (0-1,500 RPM) and high-torque (0-450 RPM) settings. This versatility allows users to easily switch between tasks that require speed for drilling and those that need more power for driving screws. Additionally, the 24-position clutch provides precise control over torque settings, ensuring that each screw is driven to the perfect depth without stripping or damaging the material.

Another key technology found in the R8411511 is the innovative brushless motor. This motor not only increases efficiency but also extends the life of the drill. Brushless motors run cooler than traditional brushed motors, which reduces wear and tear while maximizing battery life. Furthermore, this tool is equipped with an integrated LED light that illuminates workspaces in dim conditions, making it easier to work in tight or poorly lit areas.

The ergonomic design of the RIDGID R8411511 also deserves mention. With a rubberized grip and balanced weight distribution, the drill is comfortable to hold for extended periods, reducing user fatigue. It comes with a 1/2-inch keyless chuck that allows for easy bit changes, adding to its user-friendly nature.

Overall, the RIDGID R8411511 combines power, efficiency, and innovative features, making it an excellent choice for anyone in need of a reliable drill driver. Whether undertaking routine tasks or complex projects, this tool promises consistent performance and durability, solidifying its status as a favorite among tradespeople and hobbyists alike.