Specific Safety Rules, Service | RIDGID R8411511 guide

GENERAL SAFETY RULES

SERVICE

n Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel may result in a risk of injury.

nWhen servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance Instructions may create a risk of shock or injury.

SPECIFIC SAFETY RULES

n Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring. Contact with a “live” wire will also make exposed metal parts of the tool “live” and shock the operator.

nKnow your power tool. Read operator’s manual care- fully. Learn its applications and limitations, as well as the specific potential hazards related to this tool. Following this rule will reduce the risk of electric shock, fire, or serious injury.

nAlways wear safety glasses with side shields. Everyday glasses have only impact resistant lenses. They are NOT safety glasses. Following this rule will reduce the risk of eye injury.

nProtect your lungs. Wear a face or dust mask if the operation is dusty. Following this rule will reduce the risk of serious personal injury.

nProtect your hearing. Wear hearing protection during extended periods of operation. Following this rule will reduce the risk of serious personal injury.

nBattery tools do not have to be plugged into an electrical outlet; therefore, they are always in operating condition. Be aware of possible hazards when not using your battery tool or when changing accessories. Following this rule will reduce the risk of electric shock, fire, or serious personal injury.

nDo not place battery tools or their batteries near fire or heat. This will reduce the risk of explosion and possibly injury.

n Never use a battery that has been dropped or received a sharp blow. A damaged battery is subject to explosion. Properly dispose of a dropped or damaged battery immediately.

nBatteries vent hydrogen gas and can explode in the presence of a source of ignition, such as a pilot light. To reduce the risk of serious personal injury, never use any cordless product in the presence of open flame. An exploded battery can propel debris and chemicals. If exposed, flush with water immediately.

nDo not charge battery tool in a damp or wet location. Following this rule will reduce the risk of electric shock.

nFor best results, your battery tool should be charged in a location where the temperature is more than 50°F but less than 100°F. Do not store outside or in vehicles.

nUnder extreme usage or temperature conditions, battery leakage may occur. If liquid comes in contact with your skin, wash immediately with soap and water, then neutralize with lemon juice or vinegar. If liquid gets into your eyes, flush them with clean water for at least 10 minutes, then seek immediate medical attention. Following this rule will reduce the risk of seri- ous personal injury.

nSave these instructions. Refer to them frequently and use them to instruct others who may use this tool. If you loan someone this tool, loan them these instructions also.

R8411511 specifications

The RIDGID R8411511 is a powerful and versatile cordless drill driver that stands out in the competitive tool market. Known for its rugged design and exceptional performance, this tool is catered to both professionals and DIY enthusiasts alike. Equipped with a robust 18V lithium-ion battery, the R8411511 ensures maximum run time and efficiency, allowing users to tackle a variety of tasks without the worry of frequent recharging.

One of the standout features of the RIDGID R8411511 is its impressive torque output. The drill delivers an astounding maximum torque of 600 in-lbs, making it capable of handling tough materials such as metal, wood, and even masonry. This high torque setting can effectively tackle heavy-duty applications, making it an invaluable asset for construction sites or home renovations.

The tool features a 2-speed transmission, offering both high-speed (0-1,500 RPM) and high-torque (0-450 RPM) settings. This versatility allows users to easily switch between tasks that require speed for drilling and those that need more power for driving screws. Additionally, the 24-position clutch provides precise control over torque settings, ensuring that each screw is driven to the perfect depth without stripping or damaging the material.

Another key technology found in the R8411511 is the innovative brushless motor. This motor not only increases efficiency but also extends the life of the drill. Brushless motors run cooler than traditional brushed motors, which reduces wear and tear while maximizing battery life. Furthermore, this tool is equipped with an integrated LED light that illuminates workspaces in dim conditions, making it easier to work in tight or poorly lit areas.

The ergonomic design of the RIDGID R8411511 also deserves mention. With a rubberized grip and balanced weight distribution, the drill is comfortable to hold for extended periods, reducing user fatigue. It comes with a 1/2-inch keyless chuck that allows for easy bit changes, adding to its user-friendly nature.

Overall, the RIDGID R8411511 combines power, efficiency, and innovative features, making it an excellent choice for anyone in need of a reliable drill driver. Whether undertaking routine tasks or complex projects, this tool promises consistent performance and durability, solidifying its status as a favorite among tradespeople and hobbyists alike.