RIDGID R8411511 manual Service, Symbol Signal Meaning

Page 7

SYMBOLS

The following signal words and meanings are intended to explain the levels of risk associated with this product.

SYMBOL

SIGNAL

MEANING

 

DANGER:

Indicates an imminently hazardous situation, which, if not avoided, will

 

result in death or serious injury.

 

 

 

 

 

 

 

WARNING:

Indicates a potentially hazardous situation, which, if not avoided, could

 

result in death or serious injury.

 

 

 

 

 

 

 

CAUTION:

Indicates a potentially hazardous situation, which, if not avoided, may

 

result in minor or moderate injury.

 

 

 

 

 

 

 

CAUTION:

(Without Safety Alert Symbol) Indicates a situation that may result in

 

property damage.

 

 

SERVICE

Servicing requires extreme care and knowledge and should be performed only by a qualified service technician. For service we suggest you return the product to your nearest AUTHORIZED SERVICE CENTER for repair. When servic- ing, use only identical replacement parts.

WARNING:

To avoid serious personal injury, do not attempt to use this product until you read thoroughly and understand completely the operator’s manual. Save this operator’s manual and review frequently for continuing safe operation and instructing others who may use this product.

WARNING:

The operation of any power tool can result in foreign objects being thrown into your eyes, which can result in severe eye damage. Before beginning power tool operation, always wear safety goggles or safety glasses with side shields and a full face shield when needed. We recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields. Always use eye protection which is marked to comply with ANSI Z87.1.

SAVE THESE INSTRUCTIONS

7

Image 7
Contents OPERATOR’S Manual Introduction Table of ContentsWork Area General Safety RulesElectrical Safety Personal SafetyService Specific Safety RulesSafety Rules for Charger Symbol Name DESIGNATION/EXPLANATION SymbolsSymbol Signal Meaning Product Specifications FeaturesAssembly Operation LED Function of Charger Power Indicator Evaluate Indicator Charging FullVariable Speed Installing Battery PackRemoving Battery Pack Variable Speed Switch TriggerAuxiliary Handle To Tighten ReversibleTWO-SPEED Gear Train TWO Speed Gear Train HI-LORemoving Bits Installing BitsTo Increase Torque Installing Depth Gage RODAdjustable Torque Clutch Adjusting TorqueDrilling Masonry Drilling To Adjust Drilling or Hammer ModeWood Drilling Metal DrillingMallet Chuck Jaws Keyless HEX KEY Wrench Screwdriver MaintenanceGeneral Maintenance Chuck RemovalBattery Pack Removal Preparation for Recycling Keeping the Charger Vents CleanHOW to Obtain Service What is not Covered WarrantyDAY Satisfaction Guarantee Policy What is Covered Under the 3 Year Limited Service WarrantyPage Customer Service Information

R8411511 specifications

The RIDGID R8411511 is a powerful and versatile cordless drill driver that stands out in the competitive tool market. Known for its rugged design and exceptional performance, this tool is catered to both professionals and DIY enthusiasts alike. Equipped with a robust 18V lithium-ion battery, the R8411511 ensures maximum run time and efficiency, allowing users to tackle a variety of tasks without the worry of frequent recharging.

One of the standout features of the RIDGID R8411511 is its impressive torque output. The drill delivers an astounding maximum torque of 600 in-lbs, making it capable of handling tough materials such as metal, wood, and even masonry. This high torque setting can effectively tackle heavy-duty applications, making it an invaluable asset for construction sites or home renovations.

The tool features a 2-speed transmission, offering both high-speed (0-1,500 RPM) and high-torque (0-450 RPM) settings. This versatility allows users to easily switch between tasks that require speed for drilling and those that need more power for driving screws. Additionally, the 24-position clutch provides precise control over torque settings, ensuring that each screw is driven to the perfect depth without stripping or damaging the material.

Another key technology found in the R8411511 is the innovative brushless motor. This motor not only increases efficiency but also extends the life of the drill. Brushless motors run cooler than traditional brushed motors, which reduces wear and tear while maximizing battery life. Furthermore, this tool is equipped with an integrated LED light that illuminates workspaces in dim conditions, making it easier to work in tight or poorly lit areas.

The ergonomic design of the RIDGID R8411511 also deserves mention. With a rubberized grip and balanced weight distribution, the drill is comfortable to hold for extended periods, reducing user fatigue. It comes with a 1/2-inch keyless chuck that allows for easy bit changes, adding to its user-friendly nature.

Overall, the RIDGID R8411511 combines power, efficiency, and innovative features, making it an excellent choice for anyone in need of a reliable drill driver. Whether undertaking routine tasks or complex projects, this tool promises consistent performance and durability, solidifying its status as a favorite among tradespeople and hobbyists alike.