RIDGID R350RHA manual Accessories, Troubleshooting, Problem Possible Cause Solution

Page 18

ACCESSORIES

 

To order parts and maintenance kits, call 1-866-539-1710.

 

Driver Maintenance Kit

079005001101

Overhaul Kit

079002001093

Oil and Wrench Kit

079002001098

WARNING:

Current attachments and accessories available for use with this tool are listed above. Do not use any attachments or accessories not recommended by the manufacturer of this tool. The use of attachments or accessories not recommended can result in serious personal injury.

TROUBLESHOOTING

PROBLEM

POSSIBLE CAUSE

SOLUTION

 

 

 

Air leak near the top of the tool or in the trigger area

Loose screws

Tighten screws

Worn or damaged O-rings or

Install Overhaul Kit

seals

 

Air leak near the bottom of the

Loose screws

Tighten screws

 

tool

Worn or damaged O-rings or bumper

Install Overhaul Kit

 

 

 

 

 

 

 

 

 

Tool does nothing or operates

Inadequate air supply

Verify adequate air supply

 

sluggishly

Inadequate lubrication

Lubricate tool

 

 

 

 

 

 

Worn or damaged O-rings or bumper

Install Overhaul Kit

 

 

 

 

 

 

Tool jams frequently

Incorrect fasteners

Verify that fasteners are the correct size

 

 

 

Damaged fasteners

Replace fasteners

 

 

 

Loose magazine

Tighten screws

 

 

 

Dirty magazine

Clean magazine

 

 

 

Worn or damaged driver

Install Driver Maintenance Kit

 

 

 

 

 

 

18

Image 18
Contents OPERATOR’S Manual R350RHATable of Contents IntroductionService General Safety RulesPersonal Safety Work AreaSpecific Safety Rules OperationAIR Supply and Connections Loading ToolSymbols Symbol Name DESIGNATION/EXPLANATIONGlossary of Terms Activate operating controlsFeatures Product SpecificationsMagazine Adjustment Adjustable ExhaustDepth of Drive Adjustment QUICK-CONNECT Swivel ConnectorUnpacking AssemblyOperation Packing ListAdjusting the Exhaust Preparing the Tool for USEConnecting the Tool to AN AIR Supply Loading the Tool with Nails See Figures 6Using the Selectable Trigger Single Sequential Actuation ModeContact Actuation Mode Setting the AIR Pressure Drive Depth AdjustmentAdjusting the Magazine Removing Nails from the Tool Clearing a Jammed FastenerAIR SUPPLY-PRESSURE and Volume MaintenanceGeneral Maintenance LubricationAccessories TroubleshootingProblem Possible Cause Solution Warranty Customer Service Information