RIDGID R350RHA manual Customer Service Information

Page 20

OPERATOR’S MANUAL

FULL ROUND HEAD

FRAMING NAILER

R350RHA

Customer Service Information:

For parts or service, contact your nearest RIDGID authorized service center. Be sure to provide all relevant information when you call or visit. For the location of the authorized service center nearest you, please call 1-866-539-1710 or visit us online at www.ridgid.com.

The model number of this tool is found on a plate attached to the rear portion of the magazine. Please record the serial number in the space provided below. When ordering repair parts, always give the following information:

Model No.		R350RHA
Model No.
Serial No.

983000-611
3-30-06 (REV:01)	20

Image 20

Contents OPERATOR’S Manual R350RHATable of Contents IntroductionGeneral Safety Rules Personal SafetyService Work AreaSpecific Safety Rules OperationAIR Supply and Connections Loading ToolSymbols Symbol Name DESIGNATION/EXPLANATIONGlossary of Terms Activate operating controlsFeatures Product SpecificationsAdjustable Exhaust Depth of Drive AdjustmentMagazine Adjustment QUICK-CONNECT Swivel ConnectorAssembly OperationUnpacking Packing ListAdjusting the Exhaust Preparing the Tool for USEConnecting the Tool to AN AIR Supply Loading the Tool with Nails See Figures 6Contact Actuation Mode Using the Selectable TriggerSingle Sequential Actuation Mode Adjusting the Magazine Setting the AIR PressureDrive Depth Adjustment Removing Nails from the Tool Clearing a Jammed FastenerMaintenance General MaintenanceAIR SUPPLY-PRESSURE and Volume LubricationProblem Possible Cause Solution AccessoriesTroubleshooting Warranty Customer Service Information