RIDGID R350RHA Know Your Framing Nailer, Adjustable Exhaust, Depth of Drive Adjustment, Muffler

Page 9

FEATURES

KNOW YOUR FRAMING NAILER

See Figure 1.

Before attempting to use this product, familiarize yourself with all operating features and safety rules.

ADJUSTABLE EXHAUST

The exhaust can be adjusted to a variety of positions de- pending on operator preference.

DEPTH OF DRIVE ADJUSTMENT

The tool-free depth of drive adjustment lets the operator select precise driving depth of the fastener.

DRY-FIRE LOCKOUT

The dry-fire lockout feature keeps the tool from operating when fasteners are low in the magazine to prevent missing fasteners in the nail pattern and extend motor life.

IN-HANDLE AIR FILTER

The self-cleaning in-handle air filter helps keep debris out to extend the life of the tool.

INTERNAL PISTON CATCH

The internal piston catch delivers consistent driving power.

MAGAZINE ADJUSTMENT

The special magazine slide is designed to accommodate a wide range of fasteners. The magazine adjustment, located on the right side of the tool, allows the operator to quickly change nail sizes.

MUFFLER

The muffler reduces noise during operation.

NO-MAR PAD

The no-mar pad prevents marring and denting when using the tool on softer woods.

QUICK-CONNECT SWIVEL CONNECTOR

The quick-connect swivel connector helps prevent hose tangles.

RAFTER HOOK

The tool can be hung from a rafter when disconnected and not in use.

SELECTABLE TRIGGER

The selectable trigger lets the operator choose between Con- tact Actuation for higher productivity and Single Sequential Actuation for precise fastener placement.

TOE-NAILING CLAW

The toe-nailing claw reduces slipping during angled nailing operations.

9

Image 9
Contents R350RHA OPERATOR’S ManualIntroduction Table of ContentsPersonal Safety General Safety RulesService Work AreaOperation Specific Safety RulesLoading Tool AIR Supply and ConnectionsSymbol Name DESIGNATION/EXPLANATION SymbolsActivate operating controls Glossary of TermsProduct Specifications FeaturesDepth of Drive Adjustment Adjustable ExhaustMagazine Adjustment QUICK-CONNECT Swivel ConnectorOperation AssemblyUnpacking Packing ListPreparing the Tool for USE Adjusting the ExhaustConnecting the Tool to AN AIR Supply See Figures 6 Loading the Tool with NailsUsing the Selectable Trigger Single Sequential Actuation ModeContact Actuation Mode Setting the AIR Pressure Drive Depth AdjustmentAdjusting the Magazine Clearing a Jammed Fastener Removing Nails from the ToolGeneral Maintenance MaintenanceAIR SUPPLY-PRESSURE and Volume LubricationAccessories TroubleshootingProblem Possible Cause Solution Warranty Customer Service Information