RIDGID R250AFA manual Connecting the Tool to AN AIR Supply

Page 12

OPERATION

WARNING:

Disconnect the tool from the air supply before leaving the work area, moving the tool to another location, or handing the tool to another person. Failure to do so could result in serious personal

injury.

CONNECTING THE TOOL TO AN AIR SUPPLY

See Figure 5.

DANGER:

Do not use oxygen, combustible gases or bottled gases as a power source for this tool. The tool will explode and cause death or serious injury.

This tool is designed to operate on clean, dry compressed air at regulated pressures between 70 and 120 psi . The correct air pressure is the lowest pressure that will do the job.

NOTE: Air pressure that is higher than 120 psi may damage the tool.

The tool and air hose must have a hose coupling that allows all pressure to be removed from the tool when the coupling is disconnected.

WARNING:

Always use a coupling that discharges all the compressed air in the tool at the time the fitting or hose coupling is disconnected. Using a coupling that does not discharge the compressed air could cause unintended operation and serious personal injury.

WARNING:

Do not climb rigging or scaffolding while carrying a tool that is connected to an air hose. Doing so could result in serious personal injury.

Connect the tool to the air supply with a 1/4 in. female quick connector. A 3/8 in. female quick connector may be used in situations where a 1/4 in. supply line is not available. For maximum tool performance, a 3/8 in. supply line and fittings are required.

WARNING:

Disconnect the tool from the air supply before leaving the work area, moving the tool to another location, or handing the tool to another person. Failure to do so could result in serious personal injury.

SWIVEL CONNECTOR

AIR HOSE

CONNECTOR

Fig. 5

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents OPERATOR’S Manual R250AFATable of Contents IntroductionGeneral Safety Rules Personal SafetyService Work AreaSpecific Safety Rules OperationAIR Supply and Connections Loading ToolSymbols Symbol Name DESIGNATION/EXPLANATIONGlossary of Terms Activate operating controlsFeatures Product SpecificationsAdjustable Exhaust Depth of Drive AdjustmentQUICK-CONNECT Swivel Connector Know Your Finish NailerAssembly OperationUnpacking Packing ListAdjusting the Exhaust Preparing the Tool for USEConnecting the Tool to AN AIR Supply Loading the Tool with Nails See Figures 6Using the Selectable Trigger Single Sequential Actuation ModeContact Actuation Mode Setting the AIR Pressure Drive Depth AdjustmentRemoving Nails from the Tool Clearing a Jammed Fastener Maintenance AccessoriesTroubleshooting Problem Possible Cause SolutionWarranty Customer Service Information

R250AFA specifications

The RIDGID R250AFA is a powerful and versatile tool designed for professionals who require high performance in a pneumatic framing nailer. This unit is engineered to handle a variety of applications, making it an essential asset for contractors, builders, and DIY enthusiasts alike.

One of the standout features of the RIDGID R250AFA is its advanced drive technology. This pneumatic nailer utilizes a robust mechanism that delivers quick and consistent nail placement. This ensures that nails are securely fastened, providing the reliability needed in framing tasks. The tool is capable of driving 2 to 3-1/2 inch framing nails, accommodating different project requirements.

Another characteristic that sets the RIDGID R250AFA apart is its lightweight design. At just under 8 pounds, this nailer is easy to handle, which minimizes fatigue during long work sessions. The ergonomic grip and well-balanced body further enhance user comfort, allowing for precision and control in various positions and angles.

The RIDGID R250AFA also features a tool-free depth adjustment, enabling users to customize the depth of their nails effortlessly. This level of control is critical when working with different materials and ensures that nails are set flush with the surface, providing a professional finish.

The tool incorporates a selective actuation switch, which allows users to switch between bump and sequential firing modes. This flexibility makes it easier to adapt to different tasks, whether requiring rapid consecutive nailing or greater precision.

In terms of maintenance, the RIDGID R250AFA is equipped with a rear exhaust that helps direct air away from the user and the work area. This feature not only enhances comfort but also keeps the workspace cleaner by preventing debris from being blown around.

Safety is a priority with the RIDGID R250AFA as it comes with a safety tip that prevents accidental firing, ensuring user protection at all times. The magazine holds up to 70 nails, reducing downtime due to frequent reloading.

Ultimately, the RIDGID R250AFA is a robust and reliable framing nailer that combines performance, comfort, and safety. Whether it's for building frames, constructing decks, or any other nailing project, this tool is designed to meet the demanding needs of professionals in the construction industry.
Top Page Image Contents