RIDGID R250AFA manual AIR Supply and Connections, Loading Tool

Page 5

SPECIFIC SAFETY RULES

AIR SUPPLY AND CONNECTIONS

n�Do not use oxygen, combustible gases or bottled gases as a power source for this tool as tool will explode, possibly causing injury or death.

nDo not use with an air compressor which can poten- tially exceed 200 P.S.I. as tool may burst, possibly causing injury.

nThe connector on the tool must not hold pressure when air supply is disconnected. If an incorrect fitting is used, the tool can remain charged with air after discon- necting and thus will be able to drive a fastener even after the air line is disconnected, possibly causing injury.

nAlways disconnect air supply:

•Before making adjustments

•When servicing the tool

•When clearing a jam

•When tool is not in use

•When moving to a different work area, as accidental actuation may occur, possibly causing injury.

LOADING TOOL

nDo not load the tool with fasteners when any one of the operating controls is activated.

When loading tool:

nNever place a hand or any part of body in fastener discharge area of tool.

nNever point tool at anyone.

nDo not pull the trigger or depress the workpiece contact as accidental actuation may occur, possibly causing injury.

SAVE THESE INSTRUCTIONS

nRefer to them frequently and use them to instruct others who may use this tool. If you loan someone this tool, loan them these instructions also.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents R250AFA OPERATOR’S ManualIntroduction Table of ContentsPersonal Safety General Safety RulesService Work AreaOperation Specific Safety RulesLoading Tool AIR Supply and ConnectionsSymbol Name DESIGNATION/EXPLANATION SymbolsActivate operating controls Glossary of TermsProduct Specifications FeaturesDepth of Drive Adjustment Adjustable ExhaustQUICK-CONNECT Swivel Connector Know Your Finish NailerOperation AssemblyUnpacking Packing ListPreparing the Tool for USE Adjusting the ExhaustConnecting the Tool to AN AIR Supply See Figures 6 Loading the Tool with NailsContact Actuation Mode Using the Selectable TriggerSingle Sequential Actuation Mode Removing Nails from the Tool Setting the AIR PressureDrive Depth Adjustment Clearing a Jammed Fastener Accessories MaintenanceProblem Possible Cause Solution TroubleshootingWarranty Customer Service Information

R250AFA specifications

The RIDGID R250AFA is a powerful and versatile tool designed for professionals who require high performance in a pneumatic framing nailer. This unit is engineered to handle a variety of applications, making it an essential asset for contractors, builders, and DIY enthusiasts alike.

One of the standout features of the RIDGID R250AFA is its advanced drive technology. This pneumatic nailer utilizes a robust mechanism that delivers quick and consistent nail placement. This ensures that nails are securely fastened, providing the reliability needed in framing tasks. The tool is capable of driving 2 to 3-1/2 inch framing nails, accommodating different project requirements.

Another characteristic that sets the RIDGID R250AFA apart is its lightweight design. At just under 8 pounds, this nailer is easy to handle, which minimizes fatigue during long work sessions. The ergonomic grip and well-balanced body further enhance user comfort, allowing for precision and control in various positions and angles.

The RIDGID R250AFA also features a tool-free depth adjustment, enabling users to customize the depth of their nails effortlessly. This level of control is critical when working with different materials and ensures that nails are set flush with the surface, providing a professional finish.

The tool incorporates a selective actuation switch, which allows users to switch between bump and sequential firing modes. This flexibility makes it easier to adapt to different tasks, whether requiring rapid consecutive nailing or greater precision.

In terms of maintenance, the RIDGID R250AFA is equipped with a rear exhaust that helps direct air away from the user and the work area. This feature not only enhances comfort but also keeps the workspace cleaner by preventing debris from being blown around.

Safety is a priority with the RIDGID R250AFA as it comes with a safety tip that prevents accidental firing, ensuring user protection at all times. The magazine holds up to 70 nails, reducing downtime due to frequent reloading.

Ultimately, the RIDGID R250AFA is a robust and reliable framing nailer that combines performance, comfort, and safety. Whether it's for building frames, constructing decks, or any other nailing project, this tool is designed to meet the demanding needs of professionals in the construction industry.
Top Page Image Contents