Loading the Tool with Nails, See Figures 6

OPERATION

LOADING THE TOOL WITH NAILS

See Figures 6 - 7.

MAGAZINE

nConnect the tool to the air supply.

WARNING:

The tool’s driving mechanism may cycle when the tool is first connected to the air supply. Always connect the tool to the air supply before loading nails to prevent injury from unintended cycling. Always make sure the tool’s magazine is empty at the beginning of each work session, before connecting to an air supply.

n With� the nose of the tool pointed away from you, feed a strip of nails into the magazine. Be sure the nails are pointed downward and at the angle shown.

WARNING:

Keep the tool pointed away from yourself and others when loading nails. Failure to do so could result in possible serious personal injury.

nSlide the nail strip as far forward in the magazine as pos- sible.

nSlide� the pusher all the way to the rear of the magazine. Release the pusher and allow it to push the nails up to the driving mechanism. The pusher will stop when it rests against the end of the nail strip.

NOTE: Do not allow the pusher to snap back into place.

WARNING:

Use only the nails recommended for use with this tool (refer to the Fastener Guide). The use of any other nails can result in tool malfunction, leading to serious injuries.

WARNING:

NAILS

Fig. 6

PUSHER

Fig. 7

Never load nails with the workpiece contact or trigger activated. Doing so could result in possible serious personal injury.

R250AFA specifications

The RIDGID R250AFA is a powerful and versatile tool designed for professionals who require high performance in a pneumatic framing nailer. This unit is engineered to handle a variety of applications, making it an essential asset for contractors, builders, and DIY enthusiasts alike.

One of the standout features of the RIDGID R250AFA is its advanced drive technology. This pneumatic nailer utilizes a robust mechanism that delivers quick and consistent nail placement. This ensures that nails are securely fastened, providing the reliability needed in framing tasks. The tool is capable of driving 2 to 3-1/2 inch framing nails, accommodating different project requirements.

Another characteristic that sets the RIDGID R250AFA apart is its lightweight design. At just under 8 pounds, this nailer is easy to handle, which minimizes fatigue during long work sessions. The ergonomic grip and well-balanced body further enhance user comfort, allowing for precision and control in various positions and angles.

The RIDGID R250AFA also features a tool-free depth adjustment, enabling users to customize the depth of their nails effortlessly. This level of control is critical when working with different materials and ensures that nails are set flush with the surface, providing a professional finish.

The tool incorporates a selective actuation switch, which allows users to switch between bump and sequential firing modes. This flexibility makes it easier to adapt to different tasks, whether requiring rapid consecutive nailing or greater precision.

In terms of maintenance, the RIDGID R250AFA is equipped with a rear exhaust that helps direct air away from the user and the work area. This feature not only enhances comfort but also keeps the workspace cleaner by preventing debris from being blown around.

Safety is a priority with the RIDGID R250AFA as it comes with a safety tip that prevents accidental firing, ensuring user protection at all times. The magazine holds up to 70 nails, reducing downtime due to frequent reloading.

Ultimately, the RIDGID R250AFA is a robust and reliable framing nailer that combines performance, comfort, and safety. Whether it's for building frames, constructing decks, or any other nailing project, this tool is designed to meet the demanding needs of professionals in the construction industry.