RIDGID R3210-1 manual Unpacking, Instructions, Packing List

Page 11

FEATURES

SKYHOOK™
SAW HANGER	SPINDLE
	LOCK	51.5° BEVEL
		BUTTON
	DIPSTICK
	AND WRENCH
	STORAGE	Fig. 1a
		Fig. 1a

UNPACKING

INSTRUCTIONS:

When unpacking the tool:

Carefully remove the tool and accessories from the box. Make sure that all items listed in the packing list are in- cluded.

Inspect the tool carefully to make sure no breakage or damage occurred during shipping.

Do not discard the packing material until you have care- fully inspected and satisfactorily operated the tool.

If any parts are damaged or missing, please call 1-866- 539-1710 for assistance.

PACKING LIST

7-1/4 in. (184 mm) Worm Drive Saw

24-Tooth Carbide Tipped Blade Hex Wrench

Dipstick Operator’s Manual

WARNING:

If any parts are missing do not operate the tool un- til the missing parts are replaced. Failure to do so could result in possible serious personal injury.

Image 11

Contents Double Insulation OPERATOR’S ManualIntroduction Table of ContentsWork Area General Safety RulesElectrical Safety Personal SafetyCauses and Operator Prevention of Kickback Specific Safety RulesService Additional Safety Rules Symbol Name DESIGNATION/EXPLANATION SymbolsSymbol Signal Meaning Extension Cords ElectricalDouble Insulation Electrical ConnectionFeatures Features Packing List UnpackingInstructions See Figures 2 and 2a AssemblyAttaching Blade Spindle Lock Button Wrench Blade Screw Removing BladeSee Figure Blade Guard System OperationApplications SAW BladesSee Figures 5, 6, 7, KickbackSTARTING/STOPPING the SAW Adjusting Blade DepthSwitch Trigger Elevation Bracket Depth Line CUT Operating the SAWSee Figures 11, 12, To Check 0 Bevel Stop Cross CuttingBevel Cutting Bevel StopSee Figures 16 To Adjust 0 Bevel StopTo Adjust Bevel Setting Bevel Adjustment LeverNotch Notch Lower Blade Guard To Bevel CUTPocket Cutting Length of CUT Scale AdjustmentsAdjusting the Lever Lock Mechanism General MaintenanceLubrication Brush ReplacementPage HOW to Obtain Service What is not Covered WarrantyDAY Satisfaction Guarantee Policy What is Covered Under the 3 Year Limited Service WarrantyDouble Insulated 4 Worm Drive SAW