RIDGID R3210-1 manual Removing Blade, See Figure, Spindle Lock Button Wrench Blade Screw

Page 13

ASSEMBLY

REMOVING BLADE

See Figure 3.

Unplug the saw.

CAUTION:

To prevent damage to the spindle or spindle lock, always allow motor to come to a complete stop before engaging spindle lock.

Depress spindle lock button.

Remove blade screw by turning it clockwise with the hex wrench.

Remove spring washer.

Remove outer flange washer.

Lift lower blade guard.

Remove blade.

SPINDLE

LOCK BUTTON

WRENCH

BLADE

SCREW

Fig. 3

13

Image 13

Contents Double Insulation OPERATOR’S ManualIntroduction Table of ContentsElectrical Safety General Safety RulesPersonal Safety Work AreaService Specific Safety RulesCauses and Operator Prevention of Kickback Additional Safety Rules Symbol Name DESIGNATION/EXPLANATION SymbolsSymbol Signal Meaning Double Insulation ElectricalElectrical Connection Extension CordsFeatures Features Instructions UnpackingPacking List Attaching Blade AssemblySee Figures 2 and 2a See Figure Removing BladeSpindle Lock Button Wrench Blade Screw Applications OperationSAW Blades Blade Guard SystemSee Figures 5, 6, 7, KickbackSwitch Trigger Elevation Bracket Depth Adjusting Blade DepthSTARTING/STOPPING the SAW See Figures 11, 12, Operating the SAWLine CUT Bevel Cutting Cross CuttingBevel Stop To Check 0 Bevel StopTo Adjust Bevel Setting To Adjust 0 Bevel StopBevel Adjustment Lever See Figures 16Pocket Cutting To Bevel CUTNotch Notch Lower Blade Guard Adjusting the Lever Lock Mechanism AdjustmentsLength of CUT Scale General MaintenanceLubrication Brush ReplacementPage DAY Satisfaction Guarantee Policy WarrantyWhat is Covered Under the 3 Year Limited Service Warranty HOW to Obtain Service What is not CoveredDouble Insulated 4 Worm Drive SAW