Polycom IP 600 SIP manual Introduction, Installation, Connect the Network and Power Source

User Guide

Introduction

The Polycom SoundPoint IP 600 is a full-duplex, hands-free Session Initiation Protocol (SIP) phone. It provides telephony features, such as Shared Call Appearance, Call Hold, Call Transfer, and Do Not Disturb.

Installation

The following instructions provide basic installation instructions. Contact your system administrator for additional information or assistance.

Connect the Network and Power Source

AC Power Option

Connect the supplied network cable between the LAN jack on the phone and the LAN port on the wall or hub/switch device port.

Connect the DC plug on the AC wall adapter to the

DC jack marked on the phone.

In-Line Power Option

Plug the supplied network cable between the LAN jack on the phone and an available Power and Data port on the in-line power switch if the phone is connected to a compatible Ethernet switch.

Page  of 11