RIDGID R3210-1 To Adjust 0 Bevel Stop, To Adjust Bevel Setting, See Figures 16, Button SET Screw

Page 19

OPERATION

TO ADJUST 0° BEVEL STOP

See Figures 16 and 17.

Unplug the saw.

Pull bevel adjustment lever upward to release.

Turn set screw with hex wrench and adjust base until it is square with the saw blade.

Securely lock the bevel adjustment lever.

TO ADJUST BEVEL SETTING

See Figure 16.

Unplug the saw.

Pull the bevel adjustment lever upward until the motor housing moves freely.

Raise the motor housing end of the saw until you reach the desired angle setting on the bevel scale (0-45°).

NOTE: Pull the adjustment lever all the way up to set the angle at 51.5°. To reach the 51.5° bevel setting, push the 51.5° bevel button.

Press downward on the bevel adjustment lever until the motor housing is securely locked in place.

BEVEL

ADJUSTMENT

LEVER

51.5° BEVEL

BUTTON

Fig. 16

SET

SCREW

Fig. 17

19

Image 19
Contents Double Insulation OPERATOR’S ManualIntroduction Table of ContentsWork Area General Safety RulesElectrical Safety Personal SafetyService Specific Safety RulesCauses and Operator Prevention of Kickback Additional Safety Rules Symbol Name DESIGNATION/EXPLANATION SymbolsSymbol Signal Meaning Extension Cords ElectricalDouble Insulation Electrical ConnectionFeatures Features Instructions UnpackingPacking List Attaching Blade AssemblySee Figures 2 and 2a See Figure Removing BladeSpindle Lock Button Wrench Blade Screw Blade Guard System OperationApplications SAW BladesSee Figures 5, 6, 7, KickbackSwitch Trigger Elevation Bracket Depth Adjusting Blade DepthSTARTING/STOPPING the SAW See Figures 11, 12, Operating the SAWLine CUT To Check 0 Bevel Stop Cross CuttingBevel Cutting Bevel StopSee Figures 16 To Adjust 0 Bevel StopTo Adjust Bevel Setting Bevel Adjustment LeverPocket Cutting To Bevel CUTNotch Notch Lower Blade Guard Adjusting the Lever Lock Mechanism AdjustmentsLength of CUT Scale General MaintenanceLubrication Brush ReplacementPage HOW to Obtain Service What is not Covered WarrantyDAY Satisfaction Guarantee Policy What is Covered Under the 3 Year Limited Service WarrantyDouble Insulated 4 Worm Drive SAW