Contents |
| |
1. Application | 17 | |
2. | Safety references | 17 |
3. | Malfunctioning and inadmissible operation | 17 |
4. | Safety regulations | 18 |
| 4.1 Special conditions for use in Zone 0 | 18 |
5. | 19 | |
6. | Technical Details | 19 |
7. | Operating instructions | 20 |
| 7.1 Commisioning | 21 |
| 7.2 | 21 |
| 7.2.1 | 21 |
| 7.2.2 | 21 |
| 7.2.3 | 21 |
| 7.2.4 Changing measuring range | 21 |
| 7.2.5 | 22 |
| 7.3 Battery change | 22 |
| 7.4 Temperature probe | 22 |
| 7.4.1 Standard probe | 22 |
| 7.4.2 Special probe | 23 |
| 7.4.3 Calibration instructions | 24 |
8. | Repair | 24 |
9. | Cleaning and maintenance | 24 |
10. Guarantee & liability | 25 | |
11. Declaration of | 26 | |
12. | 27 | |
16 |
|
|
1. Application
The
2. Safety references
This operating manual contains information and safety recommen- dations which must be complied with in order to guarantee safe functioning of the unit under the conditions described
Please read these operating instructions very carefully before using the unit !
In case of doubt (for example due to mistakes in the translation) the German operating instructions are assumed to be valid.
3. Malfunctioning and inadmissible operation
As soon as one suspects that the safety of the equipment is end- angered, it must be taken out of service and immediately removed from the
We recommend that the unit be returned to the manufacturer for checking.
For example, the safety of the unit could be endangered when:
-damage to the housing is visible.
-the unit was subjected to improper strain.
-the unit was incorrectly stored.
-the unit was damaged in transit.
-the lettering on the unit is unreadable.
-malfunctioning occurs.
17