Cleaning Instructions

Cleaning Instructions:

1.Begin by removing the sensor lid's 4 screws with a 1/16" L wrench.

2.Gently lift the sensor's circuit board out by grasping the switch and pulling upward. Do not remove the insulation tape.

3.Clean the lens of the sensor's photo eye with a clean soft cloth moistened with 99% isopropyl alcohol (available from most electronics supply & tool distributors - e.g. Techni- Tool, Contact East, Jensen Tools, Future Active, etc.)

4.Lightly scrape off sticky label residue using an Xacto knife with a #17, #18, or #19 chisel blade. The CS2000 has double hard anodizing that is not easily penetrated, but nonetheless, care should be taken when using the Xacto knife.

5.Fold the cloth over a couple of times to make it thicker. Saturate a 2" x 2" area on the edge of the cloth with 99% isopropyl alcohol.

6.Insert the wet area of the cloth into the throat of the sensor. Pull the cloth back and forth (like shining shoes) to loosen up the sticky residue.

7.Repeat steps 4 through 6 as necessary until all traces of residue have been removed.

8.Insert a cotton swab dipped in 99% isopropyl alcohol into the hole on the top half of the sensor's case intended for the photo eye.

9.Rub the lens of the photo emitter (located on bottom half of sensor case) with the cotton swab to remove any residue present.

10.Verify that the insulation tape is still in place and re-install the sensor's circuit board.

11.Re-insert the sensor's cable into the strain relief slot located in the top/rear of the case.

12.Re-install the sensor's lid making sure the cable is pinched tight and cannot be pulled out.

-15 -

CS2000, CS2000-QD, CS2000-QDCS2000 specifications

The Contec CS2000 series, comprising models CS2000-QDCS2000, CS2000-QD, and CS2000, emerges as a cutting-edge solution in the realm of data acquisition and control systems. Renowned for their versatility and reliability, these models cater to a wide range of industries, including manufacturing, healthcare, and research facilities.

One of the standout features of the Contec CS2000 series is its seamless integration capability. Each model offers robust connectivity options, including USB, Ethernet, and RS-232, facilitating easy communication with various devices and systems. This makes it suitable for both standalone applications and more complex integrated setups.

The series is equipped with high-precision analog input channels, supporting a wide input range. This feature allows for accurate data collection and monitoring, which is crucial for applications demanding high fidelity in readings. Additionally, the digital output channels provide versatile control options that can trigger devices or send commands based on the collected data.

Technologically, the CS2000 series is designed with advanced signal processing capabilities. This ensures that noise reduction and filtering algorithms are employed, resulting in cleaner data signals and better overall performance. The user-friendly interface makes it easy for operators to configure settings and manage data efficiently, enhancing productivity across various applications.

Another noteworthy characteristic of the Contec CS2000 series is its robust protective design. Built to withstand challenging environments, these devices often include features such as IP-rated enclosures and extended temperature ranges, ensuring reliability in both indoor and outdoor settings.

The CS2000-QDCS2000 model, in particular, stands out due to its high-speed data acquisition features, making it ideal for real-time monitoring applications. The CS2000-QD variant brings additional customization options for specialized tasks, whereas the CS2000 provides essential functionalities needed for standard operations.

With outstanding performance, high adaptability, and user-friendly features, the Contec CS2000 series positions itself as an essential tool for professionals seeking reliable data acquisition and control solutions. Whether you are in research, industrial automation, or environmental monitoring, the Contec CS2000 lineup delivers the precision and efficiency needed to succeed in today’s data-driven environment.