Chauvet model EN, IEC 60825-1:2007 manual Proper Usage

Page 11

Proper Usage

This product is for overhead mounting only. For safety purposes, CHAUVET® recommends mounting your lighting effect products on steady elevated platforms or sturdy overhead supports using suitable hanging clamps. In all cases, you must use safety cables. You can obtain appropriate mounting hardware from your lighting vendor.

International laser safety regulations require that laser products must be operated in the fashion illustrated below, with a minimum of 3 meters (9.8 ft) of vertical separation between the floor and the lowest laser light vertically. Additionally, 3 meters of horizontal separation is required between laser light and audience or other public spaces.

CAUTION - USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF

PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN

HAZARDOUS RADIATION EXPOSURE

Eclipse™ RGB User Manual

11

12/20/2011

Image 11
Contents Page Table of Contents Unpacking Instructions What Is IncludedBefore YOU Begin Safety Instructions Laser Safety Notes Non Interlocked Housing WarningLaser Safety Label Reproduction Laser Compliance Statement Laser Emission DataProduct Overview IntroductionProduct Dimensions Mounting SetupAC Power Proper Usage Menu Map Operating InstructionsControl Panel Operation Configuration DMX Starting Address 12-CH DMX Channel Assignments and ValuesPage Slave units Master/Slave ModeReturns Procedure General TroubleshootingPower Technical Specifications