Chief Manufacturing CTA-225 installation instructions Chief Manufacturing INC

Page 1

I N S T A L L A T I O N I N S T R U C T I O N S

CTA-225

Dual Stud Wall Arm

The CTA-225 has a maximum weight capacity of 300 lbs. (136.1 kg).

The wall arm on the CTA-225 is 25.2” in length from the wall mount, providing ample room to install and position a small or large TV/Monitor.

CTA-225 Dual Stud Wall Arm

BEFORE YOU BEGIN

CAUTION: To prevent damage to your equipment, which could affect or void the Factory warranty, thoroughly study all instructions and illustrations before you begin to install the CTA-225. Pay particular attention to the Warnings and Cautions in this document.

If you have any questions about this installation, contact Chief Manufacturing at 1-800-582-6480 or 952-582-6480.

CHIEF MANUFACTURING INC.

8809-000025 (Rev. A)

1-800-582-6480952-894-6280 FAX 952-894-6918

2004 Chief Manufacturing

8401 EAGLE CREEK PARKWAY, STE. 700

www.chiefmfg.com

SAVAGE, MINNESOTA 55378 USA

11/04

 

 

Image 1
Contents Chief Manufacturing INC CTA-225Length CTA-225 Specifications CTA-225 SpecificationsInspect the Unit Before Installing ContentsCTA-225 Parts PartsInstalling Top Stud Spanning Adapter to Wall Tools Required for InstallationInstructions Step Attaching Wall Arm to Wall-Mounted Top Stud Spanning Adapter Attaching Stud Spanning Adapter to Wall ArmAttaching Bottom Stud Spanning Adapter to Wall Connecting NPT Pipe or Nipple to Wall ArmAttaching Front Cover