Chief Manufacturing CTA-225 installation instructions Attaching Stud Spanning Adapter to Wall Arm

Installation Instructions CTA-225

STEP 2

Attaching Stud Spanning Adapter to Wall Arm

1.Locate the wall arm (10), bottom 16” stud-spanning adapter (20), three M8 hex nuts (80), three M8 lock washers (70), and three M8 flat washers (60).

2.Attach the wall arm (10) to the bottom 16” stud- spanning adapter (20) using three M8 hex nuts (80), three M8 lock washers (70), and three M8 flat washers (60). Tighten hex nuts. See Figure 3.

Figure 3. Attach Stud Spanning Adapter to Wall Arm

STEP 3

Attaching Wall Arm to Wall-Mounted Top Stud

Spanning Adapter

1.Locate three M8 hex nuts (80), three M8 lock washers (70), and three M8 flat washers (60).

2.With an assistant, perform the following steps:

a.Lift the wall arm (10) onto the top wall-mounted 16” stud-spanning adapter (20). See Figure 4.

b.Secure the wall arm (10) to the top wall-mounted 16” stud-spanning adapter (20) using three M8 hex nuts (80), three M8 lock washers (70), and three M8 flat washers (60). Tighten hex nuts.

Figure 4. Attach Wall Arm to Wall-Mounted Stud

Spanning Adapter

6