AMX quick start Mounting the IRX-SM+, 93-0455-01

Mounting the IRX-SM+

Installation method A: Use when installing a swivel-mount unit without using the provided mounting bracket. The cable exit is on the back mounting panel (FIG. 5).

FIG. 5 Installation Method A

Installation method B: Use when installing a swivel-mount unit using the provided mounting bracket (FIG. 6).

FIG. 6 Installation Method B

•On drywall, install using the included wall anchors. Use a 3/16-inch drill bit.

•On wood, install using the included #6 mounting screws.

AMX Corporation reserves the right to alter specifications without notice at any time.	93-0455-01	REV: B
For full warranty information, refer to the AMX Instruction Manual(s) associated with your Product(s).
042-004-2750 11/04 ©2004

AMX Corporation. All rights reserved. The AMX logo is a trademark of AMX Corporation. AMX reserves the right to alter specifications without notice at any time.

3000 RESEARCH DRIVE, RICHARDSON, TX 75082 • 800.222.0193 • fax 469.624.7153 • technical support 800.932.6993 • www.amx.com