Thermo Products AH2-A, AH1-A service manual Safety Section

Page 3

All installations and services must be performed by qualified personnel.

SAFETY SECTION

This page contains various warnings and cautions found throughout this Service and Installation Manual. Please read and comply with the statements on the cover and the statements below.

: Improper installation, adjustment, alteration, service, or maintenance can cause injury or property damage. Refer to this manual. For assistance or additional information consult a qualified installer, service agency, or manufacturer listed below.

: If drilling or screwing into panel or plate is necessary, make certain drill or screw does not penetrate into any part of evaporator coil or hot water coil and cause damage. Personal injury and/or property damage may result.

: Do not use this system if any part has been under water. Immediately call a qualified service agency to inspect the system and to replace any part of the electrical or control system which has been under water.

: The cooling and heating coils must be cleaned by a qualified service person.

: This air handler is not to be used to condition during construction.

: When testing electrical equipment, always follow standard electrical procedures and precautions.

: DO NOT wet electronic components during hydronic testing. Wetting electronic components may damage circuitry and cause a hazardous situation. Dry moisture from all leads and terminals if wetting occurs. Wait at least 24 hours for the circuit to fully dry before energizing the system.

: Personal injury or property damage could result from major repair or service of this system by anyone other than a qualified contractor.

: If you do not follow these instructions exactly an unsafe condition may result causing personal injury, loss of life or property damage.

1

Page 2 Page 4
Image 3
Page 2 Page 4
Contents AIR Handler Table of Contents Section Beginning Safety Section Figure a AIR HandlerReassembly of AIR Handler Installations of A-COIL in Vertical ApplicationsFollow These Steps for Knockdown of AIR Handler Installations of A-COIL in Horizontal Application Figure B2 Figure B3 Installation of the HOT Water CoilTrim Panel Instructions Blower AIR AdjustmentFigure D Heating Tap Locations Terminal Strip Speed Duct System GPMCFM Capacity CFM Capacity ChartsIndoor Evaporator Coil Duct Sizes for HomesTubing Size Reference Chart Tubing Line SetsModel Suction Line Liquid Line Tubing Installation Figure F Page Measuring Temperature Drop Across the a Coil ExampleElectrical UA Adapter Cabinet AH AIR Handler Recommended Suspension Procedure Replacement Parts Deg

AH2-A, AH1-A specifications

Thermo Products, a leader in innovative heating solutions, has introduced two standout models: the AH2-A and AH1-A. These advanced heating systems are designed to cater to modern demands for energy efficiency, reliability, and versatile performance.

The AH2-A model is engineered with versatility in mind, making it an ideal choice for a variety of residential and commercial applications. One of its main features is its advanced heat exchange technology, which maximizes energy transfer and ensures optimal heating performance. This model can be easily integrated into existing heating systems, providing additional heating capacity without a complete system overhaul.

On the other hand, the AH1-A model focuses on simplicity and efficiency. It boasts a compact design, allowing for easy installation in tight spaces. Its lightweight structure does not compromise on performance, as it incorporates cutting-edge thermal insulation that reduces heat loss and improves overall efficiency. The AH1-A is particularly suited for environments where space is at a premium, making it a practical choice for urban settings.

Both models utilize user-friendly controls that allow for precise temperature regulation. The intuitive interface enables users to set their desired temperatures effortlessly, ensuring comfort without excessive energy consumption. Moreover, these models are equipped with smart technology that allows for remote monitoring and adjustments through mobile applications, enhancing user convenience and control over heating needs.

In terms of reliability, both the AH2-A and AH1-A are built with high-quality materials that ensure longevity and durability. Their robust designs are resistant to wear and tear, which minimizes the need for frequent maintenance and repairs. This reliability translates to lower operational costs over time, making them a cost-effective solution for heating requirements.

Energy efficiency is a hallmark of both models, complying with strict regulatory standards. With low emissions and high efficiency ratings, they contribute to reduced environmental impact while delivering exceptional performance. The overall energy savings not only benefit users’ wallets but also support global efforts towards sustainability.

In conclusion, Thermo Products' AH2-A and AH1-A heating systems represent the pinnacle of modern heating technology. Their unique features, advanced technologies, and reliable performance make them excellent choices for anyone seeking efficient and effective heating solutions. Whether for residential or commercial use, these models promise to deliver warmth and comfort while minimizing energy consumption.
Top Page Image Contents