Thermo Products AH2-A, AH1-A service manual Trim Panel Instructions, Blower AIR Adjustment

Page 9

All installations and services must be performed by qualified personnel.

5.Make appropriate hydronic connections to inlet(blower side) and outlet(duct side) of coil and braze into place.

6.Seal connections through panel with duct sealer or equivalent.

: If drilling or screwing into panel or plate is necessary, make certain drill does not penetrate into any part of evaporator coil or hot water coil. Personal injury and/or property damage may result.

Figure C

NOTE: Drain lines must be pitched no less than 1/4" per foot away from the air handler.

TRIM PANEL INSTRUCTIONS:

Included as a loosely packed part in the condensate drain pan of both air handlers is two trim panels. These panels are to be used in reducing the free area between both the hydronic coil lines and the evaporator coil lines. The hydronic coil panel has two holes which the inlet and outlet lines fit through. This panel is to be secured to the air handler via the prepunched holes and included screws. The evaporator coil panel is a flat rectangular panel measuring 8-1/2” x 3”, with a 1/2” brake on one edge. The 1/2” brake is to fit into the pocket brake of the side casing and the larger part of the panel is to be attached to the bottom door via the prepunched holes and included screws. This panel will close the gap that is created between the side of the air handler, and the grommet panel that is installed on the evaporator coil.

BLOWER AIR ADJUSTMENT

The direct drive blower must be set in order to establish proper air movement. Use the following steps to do this:

*For cooling only remove low speed connection to terminal block unless continuous fan is desired.

7

Image 9
Contents AIR Handler Table of Contents Section Beginning Safety Section Figure a AIR HandlerReassembly of AIR Handler Installations of A-COIL in Vertical ApplicationsFollow These Steps for Knockdown of AIR Handler Installations of A-COIL in Horizontal Application Figure B2 Figure B3 Installation of the HOT Water CoilTrim Panel Instructions Blower AIR AdjustmentFigure D Heating Tap Locations Terminal Strip Speed Duct System GPMCFM Capacity CFM Capacity ChartsIndoor Evaporator Coil Duct Sizes for HomesTubing Size Reference Chart Tubing Line SetsModel Suction Line Liquid Line Tubing Installation Figure F Page Measuring Temperature Drop Across the a Coil ExampleElectrical UA Adapter Cabinet AH AIR Handler Recommended Suspension Procedure Replacement Parts Deg

AH2-A, AH1-A specifications

Thermo Products, a leader in innovative heating solutions, has introduced two standout models: the AH2-A and AH1-A. These advanced heating systems are designed to cater to modern demands for energy efficiency, reliability, and versatile performance.

The AH2-A model is engineered with versatility in mind, making it an ideal choice for a variety of residential and commercial applications. One of its main features is its advanced heat exchange technology, which maximizes energy transfer and ensures optimal heating performance. This model can be easily integrated into existing heating systems, providing additional heating capacity without a complete system overhaul.

On the other hand, the AH1-A model focuses on simplicity and efficiency. It boasts a compact design, allowing for easy installation in tight spaces. Its lightweight structure does not compromise on performance, as it incorporates cutting-edge thermal insulation that reduces heat loss and improves overall efficiency. The AH1-A is particularly suited for environments where space is at a premium, making it a practical choice for urban settings.

Both models utilize user-friendly controls that allow for precise temperature regulation. The intuitive interface enables users to set their desired temperatures effortlessly, ensuring comfort without excessive energy consumption. Moreover, these models are equipped with smart technology that allows for remote monitoring and adjustments through mobile applications, enhancing user convenience and control over heating needs.

In terms of reliability, both the AH2-A and AH1-A are built with high-quality materials that ensure longevity and durability. Their robust designs are resistant to wear and tear, which minimizes the need for frequent maintenance and repairs. This reliability translates to lower operational costs over time, making them a cost-effective solution for heating requirements.

Energy efficiency is a hallmark of both models, complying with strict regulatory standards. With low emissions and high efficiency ratings, they contribute to reduced environmental impact while delivering exceptional performance. The overall energy savings not only benefit users’ wallets but also support global efforts towards sustainability.

In conclusion, Thermo Products' AH2-A and AH1-A heating systems represent the pinnacle of modern heating technology. Their unique features, advanced technologies, and reliable performance make them excellent choices for anyone seeking efficient and effective heating solutions. Whether for residential or commercial use, these models promise to deliver warmth and comfort while minimizing energy consumption.