Omron NE-C30-E instruction manual Adding medication and assembling the parts

Page 12

3. Preparing the nebuliser for use

3.2Adding medication and assembling the parts

1. Remove the mouthpiece and cap from the nebuliser kit.

2.Remove the inhalation top from the medication tank.

1)Rotate the inhalation top anti-clockwise.

2)Lift the inhalation top out of the medication tank.

3.Remove the vaporiser head from the medication tank.

2

1

53

4. Add the correct amount of prescribed medication to the medication tank.

Caution: The capacity of the medication tank is 2 to 7 ml.

max

Note: Scales on the nebuliser kit are for

5

 

3

reference only. The scale on the outside of the tank is with vaporiser head in place.

The scale on the inside is with no vaporiser head. Please use the scale on your syringe or vial for accurate measurement of medication.

12

Image 12
Contents Model NE-C30-E Contents Introduction Intended useImportant safety instructions UsageImportant safety instructions Risk of electrical shock General Safety Precautions Save these instructions for future referenceKnow your unit Rear View Bottom ViewAccessories Guide to using the Comp Air Elite Connecting the AC adapter Preparing the nebuliser for useAdding medication and assembling the parts Attaching the adult mask PVC Attaching the child mask PVC Preparing the nebuliser for use Taking medication To stop nebulisationUsing the mouthpiece Power Outlet Cleaning and daily disinfecting Disinfecting the nebulising parts Handling the Vaporiser Head Maintenance and storage Changing the air filter Troubleshooting Symptom Cause RemedyTroubleshooting Technical data Mmad = Mass Median Aerodynamic Diameter == TypeTypeBB Technical data Optional parts and accessories Filter Cover Carrying Bag Using the battery for Important notes on using the optional rechargeable battery Attach the optional battery to When battery power is low Made in China