Finished Editing?, Made an Error?, Step

Cell Constant: Standard >

Step 3

Output Setpnt: 20.0 uS>

Output Setpnt: 20.00 uS

CDTX-90 Series Editing Procedure:

Step 1. Press and hold ENTER key:

•2 seconds to select the CALIBRATE menu.

•5 seconds to select the OPTIONS menu.

Step 2. The Key Code is UP-UP-UP-DOWN keys in sequence.

•After entering the Key Code, the display will show the first item in the selected menu.

Step 3. Scroll menu with UP or DOWN arrow keys.

Step 4. Press RIGHT ARROW key to select menu item to be edited.

• The first display element will begin flashing.

Step 5. Press UP or DOWN keys to edit the flashing element.

• RIGHT ARROW key advances the flashing element.

Step 6. Press ENTER key to save the new setting and return to Step 3.

Notes on Step 1:

•The View Menu is normally displayed.

•The CALIBRATE and OPTIONS menus require a KEY CODE.

Press &

hold for	ENTER
hold for
access:
VIEW
2s	5s
CALIBRATE
OPTIONS

Notes on Step 2:

If no key is pressed for 5 minutes while display is showing "Enter Key Code", the display will return to the VIEW menu.

CALIBRATE: ----

Enter Key Code

CALIBRATE: *---

Enter Key Code

CALIBRATE: **--

Enter Key Code

CALIBRATE: ***-

Enter Key Code

First item in

CALIBRATE menu

Notes on Steps 3 and 4:

•Refer to pages 8-13 for complete listing of menu items and their use.

•From the Step 3 display, pressing the UP and DOWN keys simultaneously will return the display to the VIEW menu.

•If no key is pressed for 10 minutes, display will also return to the VIEW menu.

Step 3: Finished Editing?

Press the UP and DOWN keys simultaneously after saving the last setting to return to normal operation.

Step 4

Notes on Steps 5 and 6:

• All output functions remain active during editing.

•Only the flashing element can be edited.

•RIGHT ARROW key advances the flashing element in a continuous loop.

•Edited value is effective immediately after pressing ENTER key.

•If no key is pressed for 10 minutes unit will restore the last saved value and return to step 3.

•Step 6 (pressing ENTER key) always returns you to Step 3.

•Repeat steps 3-6 until all editing is completed.

Step 5: Made an Error?

Output Setpnt:	Step 5
10.00 uS

Output Setpnt:

10.00 uS

Output Setpnt:

19.00 uS

Press the UP and DOWN keys simultaneously

Step 6

ENTER

while any element is flashing. This will recall the last saved value of the item being edited and return you to Step 3.

Output Setpnt:

Saving

Output Setpnt: 19.00 uS >

page 9