Using the Remote Control

The Remote Control is one of the features that makes Rotary Level unique in the field of laser leveling systems. Using the Remote Control, you can control the rotation of the Base Unit from up to 100 feet away! You don't even have to be "in sight" of the Base Unit because the Remote Control operates on radio frequency.

The speed / direction buttons control the rotation of the precision step motor inside the Base Unit - which simply means that you put the laser dot right where you need it for marking or measurement.

By pressing the speed / direction buttons, you can rotate the Base Unit 360° clockwise (right) or counterclockwise (left).

There are three speeds of rotation - Fast, Medium, and Slow (very slow). The slowest speed is most helpful when you want the laser dot to hit a specific spot.

Finding The Laser Dot

Using the speed / direction buttons on the Remote Control, rotate the Base Unit until you see the LED on the Base Unit straight on (at its brightest). It is easiest to sweep the laser dot across walls or other flat surfaces. Your body can also be used as a target if operating the unit in an open field.

DANGER: Never look directly into the laser source as this may cause eye damage.

Speed/Direction Control Buttons

If laser icon	Fast
is showing,	Medium
laser is ON	Slow

NOTE: Multiple Remote Controls - can be used with one Base Unit. Additional / Replacement Remote Control can be purchased separately.