Porter-Cable LR1100 instruction manual Line Generating Feature, User Safety, FCC Statement

Page 10

Line Generating Feature

You have just purchased your Self-Leveling, Remote Controlled Laser, Rotary Level with the new line-generating feature. The following outlines the operation of the feature with your Rotary Level.

The line-generating feature converts Rotary Level’s single laser dot into a line of bright dots, designed specifically for interior leveling applications. Turn the line generation feature switch

“ON”. A horizontal, stationary line of bright laser dots will appear if the Rotary Level is level and a horizontal, flashing line of bright laser dots will appear if the Rotary Level is not level. Reposition the Rotary Level within its self-leveling range of +/- 10 degrees to achieve a stationary, horizontal level line of laser dots. The line can then be positioned around the worksite with the Rotary Level remote control.

Note: The center section of the line yields the brightest dots. Dots at the

far extreme will appear fainter.

Note: Be sure to turn the Rotary Level off during storage and transportation. Failure to do so will affect the battery life.

User Safety

Important: These labels are attached to every Rotary Level. They are not to be removed or defaced.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Self-Leveling, Remote-Controlled Laser LevelGeneral Safety Rules Functional Description AssemblyRotary Level Features Base Unit ForewordQuick Guide to Using Rotary Level OperationUsing the Remote Control Finding The Laser DotBattery replacement Base Unit 4 AA Alkaline BatteriesRecalibration Page Recalibration On the jobsite SpecificationsTroubleshooting Made In ChinaUser Safety Line Generating FeatureFCC Statement Battery General MaintenanceKeep Tool Clean Service and RepairsAccessories Canadian PORTER-CABLE Delta Service Centers
Top Page Image Contents