Battery replacement
Base Unit - 4 "AA" Alkaline Batteries
1.Unscrew the battery housing cover using either your fingers or a coin. Lift the cover off.
2.Insert the new batteries according to the illustrations on the battery slots.
3.Replace the battery housing cover and tighten the screw securely.
Remote Control - 1 9-Volt Battery
1.Unscrew the battery door on the back of the Remote Control using a slotted screwdriver. Remove the battery door by pushing down on the bottom half of the battery door.
2.Pop the battery out by lifting from the bottom of the battery.
3.Place the new battery into the battery slot and press upwards towards the contacts firmly until the battery snaps into place.
4.Replace the battery door. Tighten the screw securely.
1.
2.
3.
DANGER: - use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
6