Intended Use
This tool is intended for determining and checking horizontal ad vertical lines.
The tool is suitable exclusively for operation in enclosed working sites.
Preparation
Inserting/Replacing the Battery
ALWAYS turn off the laser and the main power switch before removing and replacing the batteries.
Alkaline batteries are recommended for the tool.
The battery compartment is located on the back of the unit. Remove the battery cover by sliding it towards the bottom of the instrument.
When inserting, pay attention to the correct polarity according to the representation on the inside of the battery compartment.
Always replace all batteries at the same time. Only use batteries from one brand and with the identical capacity.
•Remove the batteries from the tool when not using it for extended periods. When storing for extended periods, the batteries can corrode and discharge themselves.
Features
The numbering of the product features shown refers to the illustration of the tool
on page 3.
1Power switch
2Laser mode indicator (LED)
3Laser aperture
4Battery compartment
5
Other Features (not shown)
6Laser warning label
7Protective case*
8Tripod*
*The accessories illustrated or described are not included as standard delivery.