Emerson CF680ORB00, CF680BQ00 Using Your Ceiling Fan Replacing Light Bulbs, Attaching Light Kit

Page 13

BP7305 Westfield 6/30/06 12:10 AM Page 13

Using Your Ceiling Fan

Replacing Light Bulbs

1. Restore electrical power to the outlet box by turning the electricity on at the main fuse or circuit breaker box.

2. Check the operation of the fan by gently pulling on the 4-position speed control switch pull chain (large pendant) (Figure 17). The operating sequence is as follows:

THREE-SPEED

1st Pull—HIGH 2nd Pull—Medium 3rd Pull—Low 4th Pull—OFF

REVERSING SWITCH (UNDER

WATER-RESISTANT RUBBER BOOT)

To replace a burned out light bulb, raise the upper housing cover on the downrod up to the ceiling cover (Figure 18). Loosen the setscrews in the upper housing collar, then raise the cover and remove the defective bulb from the socket. Screw in the replacement 7-watt (maximum) candelabra base bulb and lower the upper housing cover. Tighten the setscrews securely and slide the upper housing cover down the downrod.

UPPER HOUSING

 

UPPER HOUSING

 

COVER

COLLAR

SETSCREWS (3)

SPEED CONTROL

SWITCH PULL CHAIN

Figure 17

LIGHT CONTROL

 

SWITCH PULL CHAIN

3. If airflow is desired in the opposite direction, turn your fan off and wait for the blades to stop turning. Then slide the reversing switch (located under the rubber boot) to the opposite position (Figure 17), and turn the fan on again. The fan blades will turn in the opposite direction and reverse the airflow.

4. Turn the housing lights on/off by gently pulling on the light control switch pull chain (small pendant) (Figure 17).

7-WATT (MAX.)

CANDELABRA BULB

Figure 18

Attaching Light Kit

CAUTION: To reduce the risk of electrical shock, disconnect the electri- cal supply circuit before installing the fan and optional light kit and/or remote control receiver.

To install an optional Emerson light kit, remove the four screws securing the switch cup assembly to the switch cup adapter. Remove the threaded plug from the switch cup and install the light kit in accordance with the light kit Owner’s Manual.

!WARNING

To avoid possible electrical shock, be sure electricity is turned off at the main service box before wiring.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Model No Limited WarrantyAdditional Safety Instructions for Installation Safety InstructionsDate Code Unpacking Instructions MaterialsElectrical Requirements Ceiling Fan How to Assemble YourMotor Flange Clevis PIN Hairpin Clip Motor Coupling Setscrew Watt MAX FAN Motor How to Hang Your Ceiling Fan How to Wire Your Ceiling Fan General Purpose Your ceiling fan is now installed, wired and ready for use Attaching Light Kit Using Your Ceiling Fan Replacing Light BulbsImportant Care Instructions MaintenanceAccessoriesTrouble Probable Cause Suggested Remedy Trouble ShootingHOW to Order Repair Parts Repair PartsKey Model No Description Repair Parts ListingBP7305 Westfield 6/30/06 1210 AM BP7305 Westfield 6/30/06 1210 AM Air Comfort Products

CF680WB00, CF680ORB00, CF680BQ00 specifications

The Emerson CF680 series ceiling fans, which includes models CF680ORB00, CF680BQ00, and CF680WB00, exemplifies a perfect blend of modern design and advanced technology. These fans are designed to cater to the diverse aesthetic preferences of homeowners while providing superior airflow and energy efficiency.

One of the standout features of the Emerson CF680 ceiling fans is their sleek and contemporary design, which makes them suitable for various interior styles. The model CF680ORB00 comes with an oil-rubbed bronze finish, lending a warm and inviting touch to your space. The CF680BQ00 boasts a brushed nickel finish that offers a polished and sophisticated appearance, while the CF680WB00 features a wooden finish, adding an elegant and classic vibe. Each finish is carefully crafted to enhance the overall aesthetic of the room.

In terms of functionality, these fans are equipped with advanced air circulation capabilities. With a powerful motor, the CF680 series efficiently moves large volumes of air, ensuring optimal comfort in any room. These fans also come with multiple speed settings, allowing users to customize airflow based on their preferences and needs.

Additionally, the Emerson CF680 fans are designed with energy efficiency in mind. Utilizing modern motor technology, these fans consume less energy compared to traditional models, helping homeowners save on electricity bills. This energy efficiency is complemented by their whisper-quiet operation, making them suitable for bedrooms, living rooms, or any space where noise might be a concern.

Installation is made easy with the CF680 series, as these fans are designed for quick and straightforward setup. The fans come with an integrated light kit, allowing for ambient lighting while maintaining functionality as a ceiling fan. This dual-purpose feature is particularly beneficial in smaller spaces where maximizing utility is essential.

Overall, the Emerson CF680ORB00, CF680BQ00, and CF680WB00 ceiling fans showcase an impressive combination of style, performance, and energy efficiency. With their innovative features and attention to detail, they provide an excellent solution for those seeking to enhance the comfort and aesthetic appeal of their indoor spaces while ensuring sustainability. These fans truly embody the modern approach to home comfort and design.
Top Page Image Contents