Spectra GL612 manual Laser Setup, Turning On/Off the laser, Features and Functions

LASER SETUP

Position the laser horizontally (tripod mount and rubber feet downward!) on a stable platform, wall mount or tripod at the desired elevation.

The laser recognizes automatically whether it is used horizontally or vertically when switched on.

Turning On/Off the laser

Press the power button to turn On/Off the laser.

Note: Depending on the setup (horizontal or vertical) and if a grade value has been dialed in, the unit starts the temperature/reference check while the thermometer symbol is flashing.

When the temperature/reference check has been finished, the standard display appears and the bubble symbols flash until self-leveling has been completed.

If the self-leveling can’t be finished based on the selected sensitivity, an error message appears.

Features and Functions

Standard Display

The remote control mirrors the functionality of the GL keypad

Battery status laser		HI alert function is activated
	Mask selection	Battery Status Remote Control
	Rotation speed		Status Radio Connectivity
		Button 1: Quickly press and release starts the
		MENU entry.
		Button 2: Quickly press and release starts the
		grade entering mode.
		Button 3: Quickly press and release activates/
		deactivates the manual mode.
		Button 4: Quickly press and release to toggle
		through the pre-selected rotation
		speeds.
		Button 5, 8: up/down arrow buttons.
		Button 6, 7: left/right arrow buttons.
		Button 9: ON/OFF button - press for 1 second to
		turn on the unit; press and hold for 2
		seconds to turn off the unit.
		Leveling/Standby – LED (green/red)

4