Intended Use
The tool is intended for determining and checking horiontal and vertical lines.
The tool is suitable exclusively for operation in enclosed working sites.
Preparation
Inserting/Replacing the Battery
Use only alkaline batteries.
To open the battery lid 5, press on the latch 4 and fold the battery lid up. Insert the batteries. When inserting, pay attention to the correct polarity according to the representation on the inside of the
battery compartment.
Always replace all batteries at the same time. Only use batteries from one brand and with the identical capacity.
•Remove the batteries from the tool when not using it for extended periods. When storing for extended periods, the batteries can corrode and discharge themselves.
Features
The numbering of the product features shown refers to the illustration of the tool on the graphic page 2.
1Exit opening for laser beam
2Automatic levelling indicator
3On/Off switch
4Latch of battery lid
5Battery lid
6Contact surface
7Laser warning label
8Tripod mount 1/4"
9Protective case
10Laser viewing glasses*
11Tripod*
*The accessories illustrated or described are not included as standard delivery.
Technical Data
Working range
– Standard . . . . . . . . . . . . . . . . . . 30ft (10m)
Levelling Accuracy . . . . . . .
typically . . . . . . . . . . . . . . . . . . . . . . . . . ±4°
Levelling duration,
typically . . . . . . . . . . . . . . . . . . . . . . . . . . .4 s
Operating temperature . . . . . . 41°F ~104°F (+5°C ~+40°C)
Storage
Relative air humidity,
max. . . . . . . . . . . . . . . . . . . . . . . . . . .90 %
Laser class | . . 2 |
Laser type . . . . . . . . . . . . . . .635 nm, <1mW
Tripod
Batteries . . . . . . . . . . . . .2 x 1.5 V LR6 (AA)
Operating lifetime, approx. . . . . . . . . . . .15 h
Weight | 0.88 lb (0.4kg) |
Please observe the article number on the type plate of your tool. The trade names of the individual tools may vary.