Use with Attachments

Working with the Tripod (See figure C)

A tripod offers a stable, height-adjustable measuring support. Place the tool via the tripod mount 8 onto the 1/4" male thread of the tripod and screw the locking screw of the tripod tight.

Holding Laterally against a Wall or Object (see figure D)

For quick checking of heights, the tool can be held by the contact surfaces 6 laterally against a vertical wall, cabinets, etc. Take care to hold the tool straightly and calmly.

Laser Viewing Glasses (Optional Accessory)

The laser viewing glasses 10, filter out the ambient light. This makes the red light of the laser appear brighter for the eyes.

•Do not use the laser viewing glasses as safety goggles. The laser viewing glasses are used for improved visualization of the laser beam, but they do not protect against laser radiation.

•Do not use the laser viewing glasses as sun glasses or in traffic. The laser viewing glasses do not afford complete UV protection and reduce colour perception.

Maintenance and Service

Store and transport the tool only in the supplied protective case 9.

Keep the tool clean at all times.

Do not immerse the tool into water or other fluids.

Wipe off debris using a moist and soft cloth. Do not use any cleaning agents or solvents.

Regularly clean the surfaces at the exit opening of the laser in particular, and pay attention to any fluff of fibers.

If the tool should fail despite the care taken in manufacturing and testing procedures, repair should be carried out by an authorized after- sales service center for Bosch power tools.

In all correspondence and spare parts orders, please always include the 10-digit article number given on the type plate of the tool.

For repairs, send in the tool in the case 9.

ENVIRONMENT PROTECTION Recycle raw materials & batteries instead of disposing of waste. The unit, accessories, packaging & used batteries should be sorted for environmentally friendly recycling in accordance with the latest regulations.

-9-