PRE-OPERATION CHECK LIST
(OWNER'S RESPONSIBILITY)
___ Review and follow all safety rules and safety decal instructions on pages 3 through 7.
___ Check that all safety decals are installed and in good condition. Replace if damaged.
___ Check to make sure all shields and guards are properly installed and in good condition. Be sure that either the discharge shield or complete vac- uum attachment is installed.
___ Check that all hardware and cotter pins are prop- erly installed and secured.
___ Check that equipment is properly and securely attached to tractor.
___ Inspect area and remove stones, branches or other hard objects that might be thrown, causing injury or damage.
___ Check all lubrication points and grease as instructed in Tractor Stability, page 10.
___ Make sure driveline
___ Do not allow riders.
___ Consult local utilities before digging. Know loca- tion of and avoid contacting all underground cables, pipelines, overhead wires and other haz- ards in digging area.
___ Check condition of stump grinder teeth before operation.
MAN0155 (Rev. 2/16/2007) | Operation 13 |
|
|