Woods Equipment SG100 manual Serial Number Plate, Be Careful

SAFETY & INSTRUCTIONAL DECALS

ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!

	Replace Immediately If Damaged!	￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿
5 - PN - MS-171
		6 - 18866
		WARNING

￿￿￿￿￿￿￿￿￿￿￿￿540￿￿￿￿￿￿￿￿￿￿RPM￿￿￿￿￿!￿￿￿￿￿"￿￿#￿￿￿￿￿$

18866-D

7 - PN 102941

WARNING

CRUSHING AND

PINCHING HAZARD

Be extremely careful handling various parts of the machine. They are heavy and hands, fingers, feet, and other body parts could be crushed or pinched between tractor and implement.

Operate tractor controls from tractor seat only.

Do not stand between tractor and implement when tractor is in gear.

Make sure parking brake is engaged before going between tractor and implement.

Stand clear of machine while in operation or when it is being raised or lowered.

FAILURE TO FOLLOW THESE

INSTRUCTIONS COULD

RESULT IN SERIOUS INJURY

OR DEATH.

1002941-A

9￿￿-￿￿PN33347￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

￿￿￿￿￿￿33347E

10 - PN 18864

DANGER

ROTATING DRIVELINE

CONTACT CAN CAUSE DEATH

KEEP AWAY!

DO NOT OPERATE WITHOUT -

All driveline guards, tractor and equipment shields in place

Drivelines securely attached at both ends

Driveline guards that turn freely on

driveline18864-C

11 - Serial Number Plate

MODEL NO. SERIAL NO.

Woods Equipment Company

Oregon, Illinois, U.S.A.

BE CAREFUL!

Use a clean, damp cloth to clean safety decals.

Avoid spraying too close to decals when using a pressure washer; high-pressure water can enter through very small scratches or under edges of decals causing them to peel or come off.

Replacement safety decals can be ordered free from your Woods dealer. To locate your nearest dealer, check the Dealer Locator at www.WoodsEquipment.com, or in the United States and Canada call 1-800-319-6637.

SG100 Safety Rules (Rev. 2/16/2007)

Safety 9