SAFETY RULES
ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!
Keep all persons away from operator control area while performing adjustments, service, or maintenance.
Tighten all bolts, nuts, and screws to torque chart specifications. Check that all cotter pins are installed securely to ensure equipment is in a safe condition before putting unit into service.
Make sure shields and guards are properly installed and in good condition. Replace if damaged.
When lubricating telescoping PTO drives, keep fingers out of shield access slots to prevent injury.
STORAGE
Block equipment securely for storage.
Do not climb or lean on equipment stored on stand.
Keep children and bystanders away from stor- age area.
SG100 Safety Rules (Rev. 6/16/2006)