Sears 315.27516 owner manual Blade Arbor, Cutting Depth at 0 Bevel Cut

Horsepower		2.75	Cutting Depth at 45° Bevel Cut	1-13/16 in. (46 mm)
Input	14 Amperes		Rating	120 volts, 60 Hz, AC
BladeDiameter	7-1/4 in. (184 mm)		No Load Speed	5,000 RPM
Blade Arbor	5/8 in. (16	mm)	Net Weight	13 Ibs.
Cutting Depth at 0 ° Bevel Cut	2-3/8 in. (60	ram)

Your circular saw has			been shipped	completely	_,	WARNING: If any parts			are missing,		do not
assembled		except for	the blade. Inspect it carefully to
						operate	this tool	until the	missing	parts	are
make	sure	no breakage or damage		has occurred		replaced.	Failure	to do so could		result	in possible
during	shipping. If any parts are damaged or missing,					serious personal		injury.

contact your nearest Sears Retail Store to obtain replacement parts before attempting to operate saw. A blade, blade wrench, and this owner's manual are also included.

The following recommended accessories are currently available at Sears Retail Stores.

•7-1/4 in. 40 Tooth General Purpose Cut-Off Blade

•7-1/4 in. 35 Tooth Master Combination Blade

•7-1/4 in. 200 Tooth Plywood Blade

•	7-1/4	in.	18	Tooth	Carbide Blade
•	7-1/4	in.	18	Tooth	Mach	II Silver	Series	Carbide	Blade
•	7-1/4	in.	24 Tooth		Mach	II Silver	Series	Carbide	Blade

•7-1/4 in. 24 Tooth Combination Carbide Blade

• Rip Guide

,_k WARNING: The use of attachments or accessories not listed might be hazardous.

6