Sears 200.71240 operating instructions

Page 12

10.3Place the charger on its side. Place one end of each bracket into slot, then place the axle assembly under each bracket. Fasten the other side of the brackets using the two, 10-32 screws provided.

10.4To Attach Handle:

Turn the charger right side up onto its foot and wheels. Remove the two top screws from each side of the charger. Align the handle so the screw holes are aligned with the screw holes on each side of the wheel charger. Attach the handle using the same screws. \

• 10 •

Image 12

Contents OPERATOR’S Manual Battery Charger Table of Contents Important Safety Instructions Page DC Connection Precautions Preparing to ChargeCharger Location Follow These Steps When Battery is Installed in ve- hicle Page Grounding and AC Power Cord Connection Instructions Grounding Methods Volt Selector Switch Ammeter Clamps Timer Parts Tools NeededPage Page Setting the Controls Battery SIZE/RATING Charging Time Hours AMP Charge RateHydrometer or Electronic Method Specific Gravity Percent of Charge NeededUsing the engine start feature Problem Possible Cause SOLUTION/REASONS