13.using the engine start feature
13.1Set charge rate switch and timer to OFF positions.
13.2With the charger unplugged from the AC outlet, connect the charger to the battery following instructions given in section 6 or 7.
13.3Plug the charger AC power cord into the AC outlet, then move timer from
OFF to HOLD position.
13.4Set the charge rate switch to the engine start position and then crank the engine. Follow the duty cycle of your charger for proper ON / OFF times.
During extremely cold weather or when the battery is severely exhausted, charge the battery for about 5 minutes before cranking the engine.
13.5If the engine fails to start, charge the battery for 5 more minutes before attempting to crank the engine again.
13.6After the engine starts, move the charge rate switch to OFF and unplug the AC power cord from the outlet before disconnecting DC clips.
14.maintenance instructions
14.1Before performing maintenance, unplug and disconnect battery charger
(see sections 6.7 or 7.6).
14.2After use, use a dry cloth to wipe all battery corrosion and other dirt or oil from terminals, cords, and the charger case.
14.3Through routine maintenance, ensure all user installed parts are secured.
15.storage instructions
15.1Store charger unplugged, in an upright condition. Cord will still conduct electricity until it is unplugged from outlet.
15.2Store inside, in a dry, cool place (unless you’re using an
15.3Do not store clips on handle, clipped together, on or around metal, or clipped to cables.
• 14 •