How to Wire Your Ceiling Fan, Stud | Emerson kf220tzg00 instruction

BP7307AuthorizedLarissa KF220Emerson1/9/06 Fan8:36 AMDealerP ge 11www.NovaLightingStore.com 800-860-1207

How to Wire Your Ceiling Fan

including ground, and that no bare wire is visible at the wire connectors, except for the ground wire.

If you feel that you do not have enough electrical wiring knowledge or experience, have your fan installed by a licensed electrician.

!WARNING

Turning off wall switch is not sufficient. To avoid possible electrical shock, be sure electricity is turned off at the main fuse box before wiring. All wiring must be in accordance with National and Local codes and the ceiling fan must be properly grounded as a precaution against possible electrical shock.

CAUTION: To reduce the risk of electrical shock, disconnect the electrical supply circuit before installing the fan, light kit or receiver.

1. Position the supply wires to the left side of the outlet box (Figure 14); position the fan wires to the right side. Partially insert the remote control receiver (flat side up) until one end rests on the hanger ball as shown in Figure 14.

NOTE: Make all wiring connections using wire connectors (supplied). Make sure that all connections are tight,

2. Refer to Figures 14 and 15 and connect the receiver wires to the supply wires and the fan motor wires as follows:

a.Securely connect the green grounding wires from the hanger ball and the hanger bracket to the supply grounding conductor (this may be a bare wire or a wire with green insulation).

b.Securely connect the supply white (neutral) wire to the receiver white (AC IN N) wire.

c.Securely connect the supply black wire (hot) wire to the receiver black (AC IN

L)wire.

d.Securely connect the fan motor white wire to the receiver white (TO MOTOR

N)wire.

e.Securely connect the fan motor black wire to the receiver red (TO MOTOR L) wire.

f.Securely connect the fan motor blue wire to the receiver blue (FOR LIGHT) wire.

!WARNING

Check to see that all connections are tight, including ground, and that no bare wire is visible at the wire connectors, except for the ground wire. Do not operate fan until blades are in place. Noise and fan damage could result.

	SUPPLY WHITE WIRE
	(NEUTRAL)
	AC
	I
	N	N
	SUPPLY BLACK	N
	SUPPLY BLACK
	WIRE (HOT)
	GROUND WIRE

GREEN GROUND

WIRE FROM

HANGER BALL

ANTENNA

GREEN GROUND

WIRE FROM

HANGER BRACKET

1-1/4" THREADED

Figure 14 STUD (2)

RECEIVER WHITE
WIRE	RECEIVER
	RECEIVER
	BLACK WIRE
				RECEIVER RED WIRE
						RECEIVER BLUE
						WIRE
					MOTOR	L
AC IN L	MOTOR	N			MOTOR
AC IN L			LIGHT
			LIGHT	TO
	TO		FOR	TO
	TO
FAN
FAN
BLACK
WIRE
FAN BLUE WIRE
FAN WHITE WIRE	RECEIVER WHITE WIRE
	RECEIVER WHITE WIRE

Emerson Fans Available at www.NovaLightingStore.com 800-860-1207

kf220tzg00 specifications

The Emerson KF220TZG00 is a highly efficient and versatile temperature control solution designed for various commercial and industrial applications. Aimed primarily at improving energy efficiency and ensuring precise refrigeration and HVAC system operation, this innovative product stands out in the marketplace for its performance and technological features.

One of the main features of the KF220TZG00 is its advanced temperature control technology. It uses high-precision sensors to monitor temperature fluctuations, providing real-time data and enabling quick adjustments to maintain optimal performance. This level of accuracy is essential for industries that require stringent temperature regulations, such as food storage and pharmaceuticals.

The KF220TZG00 also incorporates energy-saving technologies that help organizations reduce their operational costs. By optimizing compressor operation and minimizing energy consumption during low-demand periods, this model significantly lowers electricity bills. This feature aligns with the growing emphasis on sustainability in various sectors, allowing businesses to reduce their carbon footprint.

In terms of user-friendly attributes, the KF220TZG00 features an intuitive digital interface. The display is designed for easy navigation, enabling operators to make adjustments and monitor system performance without requiring extensive training. Additionally, it offers remote monitoring capabilities through internet connectivity, providing users with the flexibility to manage systems from virtually anywhere.

Durability is another characteristic that enhances the appeal of the KF220TZG00. Built with robust materials, it can withstand challenging environmental conditions, making it suitable for a wide range of applications, from commercial refrigeration to industrial processing. The device is also designed to provide long service life, reducing the need for frequent replacements and maintenance.

Moreover, the KF220TZG00 supports various communication protocols, allowing it to integrate seamlessly with existing control systems. This interoperability makes it an ideal choice for businesses looking to upgrade their equipment without overhauling their entire system.

In summary, the Emerson KF220TZG00 is a sophisticated temperature control solution that excels in accuracy, energy efficiency, user-friendliness, durability, and compatibility. These features make it a perfect choice for organizations aiming to enhance their operational efficiency while adhering to environmental and safety standards. Whether for commercial refrigeration or industrial climates, the KF220TZG00 stands out as a trustworthy and innovative solution.