Emerson kf220tzg00 owner manual PIN Hanger Ball Downrod Setscrew Hairpin

Page 8

BP7307AuthorizedLarissa KF220Emerson1/9/06 Fan8:36 AMDealerP ge 8www.NovaLightingStore.com 800-860-1207

11. Remove the hanger ball by loosening the setscrew in the hanger ball until the ball falls freely down the downrod (Figure 7). Remove the pin from the downrod, then remove the hanger ball. Retain the pin and hanger ball for reinstallation in step 18.

!WARNING

It is critical that the clevis pin in the motor coupling is properly installed and the setscrew securely tightened. Failure to verify that the pin and setscrew are properly installed (as shown in Figure 8) could result in the fan falling.

PIN

HANGER

BALL

DOWNROD

SETSCREW

 

DOWNROD

HAIRPIN

CLEVIS

CLIP

 

PIN

MOTOR

 

COUPLING

 

Figure 7

NOTE: If you have an eight-foot ceiling, you will have to use the 6” downrod (supplied) in order to maintain the necessary blade-to-floor clearance of seven feet.

12. Unscrew the two upper setscrews (Figure 8) until they clear the inside of the motor coupling. Then separate, untwist and unkink the three 80” motor leads. Route the motor lead wires through the downrod. Align the clevis pin holes in the downrod with the holes in the motor coupling. Install the clevis pin and secure with the hairpin clip (Figure 8). The clevis pin must go through the holes in the motor coupling and the holes in the downrod. Be sure to push the straight leg of the hairpin clip through the hole near the end of the clevis pin until the curved portion of the hairpin clip snaps around the clevis pin. The hairpin clip must be properly installed to prevent the clevis pin from working loose. Pull up on the downrod to make sure the clevis pin is properly installed.

SETSCREW (2)

Figure 8

13. Tighten the two upper setscrews (Figure 8) securely while pulling up on the downrod.

NOTE: The setscrews must be properly installed as described above, or fan wobble could result.

14. Make sure the grommet is properly installed in the coupling cover, then slide the coupling cover over the downrod until it rests on the motor housing (Figure 9).

NOTE: If you installed the 6” downrod, the three downrod scrolls and scroll retaining ring will not be installed. Disregard steps 15 through 17; proceed to step 18.

8

Emerson Fans Available at www.NovaLightingStore.com 800-860-1207

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Larissa Date Code Safety InstructionsAdditional Safety Instructions for Installation Materials Unpacking InstructionsEmerson General Electrical Requirements Ceiling Fan ProceduresHow to Assemble Your Ceiling Fan Switch CUP Plate Switch CUP Assembly PIN Hanger Ball Downrod Setscrew Hairpin Scroll How to Hang Your Ceiling Fan TABHow to Wire Your Ceiling Fan StudSW101 FAN/LIGHT Wall Control Supplied Black To HOT Installation of Wall Control Setting Operating Frequency of Wall Control and ReceiverRequired WAY WIRlNG Diagram NEW Construction Do not connect any neutral whiteOn position.REVERSING Switch Operating Your Ceiling FanFor your Ceiling Fan MaintenanceAccessoriesImportant Care Instructions Trouble Shooting Trouble Probable Cause Suggested RemedyRepair Parts HOW to Order Repair PartsModel No Description Repair Parts ListingKey Limited Warranty What The Warranty Covers

kf220tzg00 specifications

The Emerson KF220TZG00 is a highly efficient and versatile temperature control solution designed for various commercial and industrial applications. Aimed primarily at improving energy efficiency and ensuring precise refrigeration and HVAC system operation, this innovative product stands out in the marketplace for its performance and technological features.

One of the main features of the KF220TZG00 is its advanced temperature control technology. It uses high-precision sensors to monitor temperature fluctuations, providing real-time data and enabling quick adjustments to maintain optimal performance. This level of accuracy is essential for industries that require stringent temperature regulations, such as food storage and pharmaceuticals.

The KF220TZG00 also incorporates energy-saving technologies that help organizations reduce their operational costs. By optimizing compressor operation and minimizing energy consumption during low-demand periods, this model significantly lowers electricity bills. This feature aligns with the growing emphasis on sustainability in various sectors, allowing businesses to reduce their carbon footprint.

In terms of user-friendly attributes, the KF220TZG00 features an intuitive digital interface. The display is designed for easy navigation, enabling operators to make adjustments and monitor system performance without requiring extensive training. Additionally, it offers remote monitoring capabilities through internet connectivity, providing users with the flexibility to manage systems from virtually anywhere.

Durability is another characteristic that enhances the appeal of the KF220TZG00. Built with robust materials, it can withstand challenging environmental conditions, making it suitable for a wide range of applications, from commercial refrigeration to industrial processing. The device is also designed to provide long service life, reducing the need for frequent replacements and maintenance.

Moreover, the KF220TZG00 supports various communication protocols, allowing it to integrate seamlessly with existing control systems. This interoperability makes it an ideal choice for businesses looking to upgrade their equipment without overhauling their entire system.

In summary, the Emerson KF220TZG00 is a sophisticated temperature control solution that excels in accuracy, energy efficiency, user-friendliness, durability, and compatibility. These features make it a perfect choice for organizations aiming to enhance their operational efficiency while adhering to environmental and safety standards. Whether for commercial refrigeration or industrial climates, the KF220TZG00 stands out as a trustworthy and innovative solution.
Top Page Image Contents