Emerson kf220tzg00 owner manual Switch CUP Plate

Page 6

BP7307AuthorizedLarissa KF220Emerson1/9/06 Fan8:36 AMDealerP ge 6www.NovaLightingStore.com 800-860-1207

10-24 X 8mm PAN HEAD SCREW (3)

FLAT WASHER (3)

FAN

BLADE

BLADE FLANGE

Figure 1

2. Remove and discard the four shipping retainers securing the motor hub in the motor housing.

NOTE: Take care not to scratch the fan housing when installing the blade assemblies.

3. Insert an 1/4-20 x 13mm oval head screw (supplied) into each of the two recessed holes in one of the blade flanges.

4. Rotate the motor hub so that two threaded holes line up with the two notches in the switch cup plate (Figure 2). Position the blade flange on the motor hub so that the screws in the blades flange align with the two threaded holes in the motor hub. Loosely tighten the screws at this time. Repeat this procedure for the remaining four blade assemblies.

5. Gently snug all flange screws to the motor hub, working around the hub in a clockwise sequence. Next, securely tighten all flange screws, again working in a clockwise sequence. Failure to follow this procedure could result in fan wobble. This completes the blade installation.

NOTE: If you wish to assemble your ceiling fan without the lower light installed, skip steps 6 and 7, and proceed to install the switch cup assembly in accordance with steps 8 and 9.

6.Remove the plastic plug from the center hole in the switch cup assembly.

Pass the two light fitter wires through the center hole, then screw the switch cup assembly onto the light fitter threaded nipple (Figure 3). Install a lockwasher and 1/8-27 nut (supplied) on the threaded nipple to secure the switch cup assembly to the decorative ring/light fitter assembly

DECORATIVE RING/LIGHT

FITTER ASSEMBLY

 

WHITE WIRE

WHITE WIRE

SWITCH CUP

ASSEMBLY

BLUE

WIRE 1/8-27 NUT &

LOCKWASHER

BLACK WIRE

LIGHT

 

FITTER

SWITCH CUP PLATE

Figure 3

 

NOTCH

1/4-20 x 13mm OVAL HEAD

SCREWS (2) BLADE FLANGE

MOTOR HUB

Figure 2

7. Connect the white wire from the light fitter to the white wire in the switch cup assembly (Figure 3). Connect the black wire from the light fitter to the blue wire in the switch cup.

6

Emerson Fans Available at www.NovaLightingStore.com 800-860-1207

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Larissa Safety Instructions Additional Safety Instructions for InstallationDate Code Materials Unpacking InstructionsEmerson Electrical Requirements Ceiling Fan Procedures How to Assemble Your Ceiling FanGeneral Switch CUP Plate Switch CUP Assembly PIN Hanger Ball Downrod Setscrew Hairpin Scroll How to Hang Your Ceiling Fan TABHow to Wire Your Ceiling Fan StudSW101 FAN/LIGHT Wall Control Supplied Black To HOT Installation of Wall Control Setting Operating Frequency of Wall Control and ReceiverRequired WAY WIRlNG Diagram NEW Construction Do not connect any neutral whiteOn position.REVERSING Switch Operating Your Ceiling FanMaintenanceAccessories Important Care InstructionsFor your Ceiling Fan Trouble Shooting Trouble Probable Cause Suggested RemedyRepair Parts HOW to Order Repair PartsRepair Parts Listing KeyModel No Description Limited Warranty What The Warranty Covers

kf220tzg00 specifications

The Emerson KF220TZG00 is a highly efficient and versatile temperature control solution designed for various commercial and industrial applications. Aimed primarily at improving energy efficiency and ensuring precise refrigeration and HVAC system operation, this innovative product stands out in the marketplace for its performance and technological features.

One of the main features of the KF220TZG00 is its advanced temperature control technology. It uses high-precision sensors to monitor temperature fluctuations, providing real-time data and enabling quick adjustments to maintain optimal performance. This level of accuracy is essential for industries that require stringent temperature regulations, such as food storage and pharmaceuticals.

The KF220TZG00 also incorporates energy-saving technologies that help organizations reduce their operational costs. By optimizing compressor operation and minimizing energy consumption during low-demand periods, this model significantly lowers electricity bills. This feature aligns with the growing emphasis on sustainability in various sectors, allowing businesses to reduce their carbon footprint.

In terms of user-friendly attributes, the KF220TZG00 features an intuitive digital interface. The display is designed for easy navigation, enabling operators to make adjustments and monitor system performance without requiring extensive training. Additionally, it offers remote monitoring capabilities through internet connectivity, providing users with the flexibility to manage systems from virtually anywhere.

Durability is another characteristic that enhances the appeal of the KF220TZG00. Built with robust materials, it can withstand challenging environmental conditions, making it suitable for a wide range of applications, from commercial refrigeration to industrial processing. The device is also designed to provide long service life, reducing the need for frequent replacements and maintenance.

Moreover, the KF220TZG00 supports various communication protocols, allowing it to integrate seamlessly with existing control systems. This interoperability makes it an ideal choice for businesses looking to upgrade their equipment without overhauling their entire system.

In summary, the Emerson KF220TZG00 is a sophisticated temperature control solution that excels in accuracy, energy efficiency, user-friendliness, durability, and compatibility. These features make it a perfect choice for organizations aiming to enhance their operational efficiency while adhering to environmental and safety standards. Whether for commercial refrigeration or industrial climates, the KF220TZG00 stands out as a trustworthy and innovative solution.
Top Page Image Contents