Sears 113.20765 manual Hol .% Ets,,I, PIN-BLADE Slot

assembly

3.For plain-end blades, remove blade holders (with blade installed) from retainer clips by putling

clips away from blade holders. Pull out upper and Iowe_ blade holders Ptace blade ho(der'assembly in blade holder pockets with set screw side upward

BLADE HOLDERS ///J " _'

4 Use set screw wrench to remove set screws in blade holders, and remove blade

HOL' .% ETS,,I,,--/.

5.For pin type blades, place blade holder keys as shown on blade holders before releasing tension

6 After blade tension is released, pull blade out of upper and lower blade holders, remove blade holder keys and blade holders

BLADEUPPER ARM

HOLDER

SLOT I_!J _

PIN-BLADE

SLOT

BLADE HOLDER

/

BLADE HOLDER

12