assembly
INSTALLATION OF BEVEL SCALES
1 With blade installed and tensioned, Iocatetwo (2) bevel scales among loose parts
2Locate slit in paper backing on back side of scale. Remove backing on the zero end of scale.
3While holding scale by the end still protected by the backing, lightly position unprotected end in the scale recess and slide it under the indicator
Align the zero mark with the indicator and press the scale to the base.
4.Loosen bevel lock knob located under- the base and tilt head away from scale
5 Fold scale back and remove remaining paper backing. Press entire scale against base Smooth
out any wrinkles or air bubbles.
6 Repeat on opposit# side
PEEL OFF THIS PIECE OF SCALE BACKING FIRST
(2ND SCALE POSIT!ON}
RECESS
IN BASE LINE UP "0" MARK WITH INDICATOR
=[lllUil,llllll=U=1=kJJ
TILT HEAD TO CLEAR SCALE
BEVEL LOCK KNOB
14