Sears 113.23615 manual TWrencl, Rod Lower Blade Holder

Page 26

tel:clockwise _ about three full turns.

3, Insert the blade change rod through the hole above the blade holder and loosen the hex socket screw of the blade holder with the "T" wrench.

4!. Remove blade from upper blade holder.

5i: Loosen th:e lower blade holder he× socket :screw in the sarnewayaS the upper blade holder in step 3.

61Remove blade from lower blade holder.

.... T":Wrencl_

: : :BladChang_.:-,

Rod ::!:::::

=::

___lower Blade Holder

Knob

Blade Change Rod

"T" Wrench

Upper

Blade Holder

NOTE: Teeth pointing downward.

Note: Teeth

PointingBlade

Holder

Hex Socket

Screw

Blade Change Rod

Image 26

Contents Airs NumberSafer When Installing or Moving The SawSafety Signal Words Before Using The Saw Before Each UseRemove all traces of wood dust from on Tan Ahead to Protect Your Eyes, HandsFace and Ears Before Leaving the Saw Inih Whenever Saw Is RunningYU Wilti Holld Hazard and may also create a shock hazard Motors, Specifications and Electricat RequirementsConnecting To Power Supply Outlet Prong Plug ProperlyU GroundedContents Assembly and alignment Do not lift saw by this arm LiftToAlign the Bevel indiCator Bevel Pointer Knob UnP!ug=powercord from outlet and Checkthat switch is ofLRemoving Pin End Blades Removing Plain End Blades Installing Plain End BladesUnplug power cord from outlet and check that switch is off Ion KnobBlade Height AdjustmentKnob Hold-DownDust Blower Hold-Down FootMounting the Scroll Saw to a Bench Upper Blade Holder Work Hogd-Down Blade Support Children And OthersSpeed Control/On-Off Knob Push RotatePin and Plain end Biades 012Basic Saw Operations Maintain Tools With CareInspect your workpiece Ha aRemoveall traces of wood dust from inside Keep your face and body to one side of blade, out of lineBefore Leaving The Saw Power source outlet before removing or replacing the bladeWhenever Saw Is Running Before freeing any jammed materialPastewax onthe woktabte will Sears recommends the following accessories Wrong tension1312 Always Order By Part Number-Not By Key Number Plate Clip0ffii Unplug power cord from outlet and check that switch isRBlades Blade Clamp Thick Installing Pin End BladesBlade Holder BossThin Clamp Holder Upper Blade Holder Lower Blade HolderWrench Upper Blade Holder PointingBlade Hex Socket Screw TWrenclRod Lower Blade Holder Blade Clamp Circular Btade Beveled Holder Edge Impression Installing Plain End BadesBeveled Edge Circular ImiDression Blade Clam IBld r INCH Variable Speed Scroll SAW Sold by SEARS, Roebuck and CO., Chicago, II U.S.A